printer 6055 Number 0 lit up paper icon lit up

[mich65]

when I go to print on my printer the number 0 and the paper icon light up, I have researched this code and it said wrong size paper or printer cartridge, I have checked both and they are fine. 

[Raj_05]

Hi @mich65,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

It sounds like your HP ENVY 6055 printer is indicating an issue with the paper size or the cartridge. Here are a few steps you can take to troubleshoot this.

• Check Paper Size Settings: Make sure the paper size settings in your printer driver or control panel match the paper size loaded in the tray. Sometimes, even a slight mismatch can trigger this error.
• Reload Paper: Remove the paper from the tray, check for any damage or bends, and then reload it properly. Ensure that the paper guides are adjusted snugly against the edges of the paper stack to prevent misfeeds.
• Verify Cartridges: Remove the cartridges and inspect them for any protective tape that might still be attached. Ensure they are properly seated and securely installed.
• Restart the Printer: Power off your printer, wait for about 30 seconds, and then power it back on. This can sometimes clear out temporary errors.
• Update Printer Firmware: Check if there are any firmware updates available for your printer. Sometimes, updating the firmware can resolve bugs or issues causing incorrect error messages.
• Reset Printer: If the issue persists, try performing a reset on your printer. Each printer model might have a specific method to reset it, usually accessible through the printer's menu or settings.

By going through these steps, you should be able to troubleshoot and resolve the issue with the "0 and paper icon" error on your HP ENVY 6055 printer.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support