printer problem

[bob19481]

I was printing my federal tax return, only had 5 pages to go and it stop with 5 pages to go. Try to reprint and now it is saying cancelling print...been going on for 1/2 hour...please help

[Riddle_Decipher]

@bob19481

There are a few things that should resolve the issue, let's start with the below:

1. Turn the printer on, if it is not already on.

2. Wait until the printer is idle and silent before you continue.

3. With the printer turned on, disconnect the power cord from the rear of the printer.

4. Unplug the power cord from the wall outlet.

5. Wait at least 60 seconds.

6. Plug the power cord back into the wall outlet.

   NOTE: 

   HP recommends connecting the printer power cord directly to the wall outlet.

7. Reconnect the power cord to the rear of the printer.

8. Turn on the printer, if it does not automatically turn on.

9. Wait until the printer is idle and silent before you proceed.

Try to print. If the issue persists, continue to the next step.

Step 1: Use HP Print and Scan Doctor

 Download and run the HP Print and Scan Doctor to automatically diagnose and resolve printer hardware and connection issues.

Read and respond to the screens in HP Print and Scan doctor to automatically find and fix any printer problem. After you have finished using HP Print and Scan Doctor, try to print. If the print job becomes stuck again, continue to the next step.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE

(By the end of this article all the issues should be resolved)

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.