HP 5520 won't scan anymore

[HypreX]

Hi,

SO printer is working fine, prints good. All of sudden I can't scan anymore. Through the HP software or through windows Printers Scan. 

Noting has really change, no extra software installed, 

- we changed cable, usb port

- uninstalled drivers and installed new

Still no help with scanner, same error that PC can't connect to scanner. You can print no problem but "scanner" seems to be  broken..which is unusal. 

Any ideas?

[Jeet_singh]

@HypreX,

Welcome to the HP Forums 🙂 I would like to take a moment and thank you for using this forum, it is a great place to find answers. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for First Time Here? Learn How to Post and More. I understand you are having issues while scanning from your HP Envy printer. 

Don't worry we'll work together to help you find a solution.

To provide you with an accurate solution, I'll need a few more details:

Did this happen after a power surge or power outage?

Does that Scanner bulb light up?

Does the scanner bar move when you open the lid & press the copy button?

Have you checked if the unit can make a standalone copy? If ‘YES’ then it means the scan hardware of the All-in-One works fine.

In the meantime, let's try these steps here: 

Perform a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

If your printer connected wireless, make sure to temporary connect the device with USB and then follow the link to install the latest firmware update.Once done, restart the printer and check.

For more details on how to update the printer firmware - HP Printers - Updating or Upgrading Printer Firmware

Let’s  try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.

If the copy comes out fine, then I would suggest you try to follow the steps suggested below to do a clean install of the printer software: 

• Press “Windows key” + “r” to get the “Run” window.
• Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
• Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP Envy printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.
• Now click here (Please enter the product number and then select the correct Operating system and version of Windows before downloading and installing the printer software).
• Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

I hope you have a good day ahead,

And Feel free to ask your queries as this forum has some of the best people in the world available and ready to help.

Regards,