• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Note: From May 1, 2024, the HP Scan and Capture app will no longer be available (retired) in the Microsoft Store and HP will not release any further app updates. Alternatively, you can download HP Smart from the Microsoft Store. For more information on how to set up your printer using the HP Smart app, go to HP printer setup (HP Smart app).
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended
HP Envy Photo 6232
Microsoft Windows 10 (64-bit)

Despite running HP Scan Doctor several times, my scanner NEVER scans first time. I have to switch it off then back on again. Very frustrating. How can HP sell such rubbish?

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@Moodygreen,

 

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. I see from your post that you are having issues while scanning from your HP Envy printer. No worries, I'll be glad to help you.

 

To provide you with an accurate solution, I'll need a few more details:

Have you recently made any changes on the printer before the issue started?

Have you tried to update the printer firmware?

Does that Scanner bulb light up?

Does the scanner bar move when you open the lid & press the copy button?

Are you having issues while making a copy from the printer?

 

In the meantime, let's try these steps here: 

 

Let's start off by updating the printer firmware. If your printer connected wirelessly, make sure to temporary connect the device with USB and then follow the link to install the latest firmware update on your printer from our HP support website. Alternatively you can also try to update the printer firmware directly from the printer control panel.

For more details on how to update, please use this link: HP Printers - Updating or Upgrading Printer Firmware

 

If the issue persists, I would suggest here is to do a hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

 

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

 

Let’s first try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.

 

If the copy comes out fine, then I would suggest here is to do a root level uninstall and reinstall of the printer drivers: 

  • Press “Windows key” + “r” to get the “Run” window.
  • Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
  • Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.
  • Go to services again - Start the print spooler.
  • Now check for issue resolution.
  • If the issue persists, also try clean installing the printer drivers. Here are the steps:
  • First, unplug the USB cable from the printer if present.
  • Go to Control panel – Programs and feature – Select all the HP Envy printer entries and uninstall them.
  • Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
  • Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
  • Under print server properties, go to drivers - remove any entry there as well.
  • Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
  • Restart your computer.
  • Please click here to download and install the software.
  • Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.

Jeet_Singh
I am an HP Employee

View solution in original post

2 REPLIES 2
HP Recommended

@Moodygreen,

 

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. I see from your post that you are having issues while scanning from your HP Envy printer. No worries, I'll be glad to help you.

 

To provide you with an accurate solution, I'll need a few more details:

Have you recently made any changes on the printer before the issue started?

Have you tried to update the printer firmware?

Does that Scanner bulb light up?

Does the scanner bar move when you open the lid & press the copy button?

Are you having issues while making a copy from the printer?

 

In the meantime, let's try these steps here: 

 

Let's start off by updating the printer firmware. If your printer connected wirelessly, make sure to temporary connect the device with USB and then follow the link to install the latest firmware update on your printer from our HP support website. Alternatively you can also try to update the printer firmware directly from the printer control panel.

For more details on how to update, please use this link: HP Printers - Updating or Upgrading Printer Firmware

 

If the issue persists, I would suggest here is to do a hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

 

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

 

Let’s first try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.

 

If the copy comes out fine, then I would suggest here is to do a root level uninstall and reinstall of the printer drivers: 

  • Press “Windows key” + “r” to get the “Run” window.
  • Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
  • Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.
  • Go to services again - Start the print spooler.
  • Now check for issue resolution.
  • If the issue persists, also try clean installing the printer drivers. Here are the steps:
  • First, unplug the USB cable from the printer if present.
  • Go to Control panel – Programs and feature – Select all the HP Envy printer entries and uninstall them.
  • Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
  • Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
  • Under print server properties, go to drivers - remove any entry there as well.
  • Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
  • Restart your computer.
  • Please click here to download and install the software.
  • Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.

Jeet_Singh
I am an HP Employee

HP Recommended

Thanks. This seems to have worked without doing the root uninstall. I will monitor it and do the uninstall if the problem come again.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.