I have an Envy 5530 printer that will scan from to my computer but won't scan to email.

[CharlesRich]

I have an Envy 5530 printer that will scan from to my computer but won't scan to email. It was working great then just quit. Now it gets all the way through the process to the very end, then says the scan failed.

[A4Apollo]

Hi! @CharlesRich, Thanks for stopping by the HP Support Community!
 
As you have scan to email issues with the printer.

I'd like to help you further, But please share us few details to assist you better.
 
Did you make any changes to the printer?

Have you tried checking with a different email client?

Let's try the troubleshooting now. 

Try updating the email address and password in the EWS page.
 

Try to configure scan to email feature again.

Configure the Scan to E-mail feature

1. Click the System tab.

2. On the left navigation pane, click the Administration link.

3. In the Enabled Features area, set the Scan to Email option to On.

4. Click the Scan tab.

5. On the left navigation pane, click the Outgoing E-mail Profiles link.

6. On the Outgoing E-mail Profiles page, click the New button.

7. In the E-mail Address area, complete the following fields:

   1. In the Your E-mail Address field, enter the sender’s email address for the new outgoing email profile.

   2. In the Display Name field, enter the sender’s name. This is the name that will display on the printer control panel.

8. In the SMTP Server Settings area, complete the following fields:

   1. In the SMTP Server field, enter the address of the SMTP server.

   2. In the SMTP Port field, enter the SMTP port number.

         NOTE:

      In most cases, the default port number does not need to be changed.

         NOTE:

      If you are using a hosted SMTP service such as gmail, verify the SMTP address, port number, and SSL settings from the service provider’s Web site or other sources. Typically, for gmail, the SMTP address is smtp.gmail.com, port number 465, and the SSL should be enabled.

      Please refer to online sources to confirm these server settings are current and valid at the time of configuration.

   3. If you are using Google™ Gmail for email service, select the Always use secure connection (SSL/TLS) check box.

9. If the SMTP server requires authentication to send an email, complete the following fields in the SMTP Authentication area:

   1. Select the SMTP server requires authentication for outgoing e-mail messages check box.

   2. In the SMTP User ID field, enter the user ID for the SMTP server.

   3. In the SMTP Password field, enter the password for the SMTP server.

10. To require a PIN to be entered on the printer control panel before an email is sent using the email address, complete the following fields in the Optional PIN area:

    1. In the PIN (Optional) field, enter a four digit PIN.

    2. In the Confirm PIN field, re-enter the four digit PIN.

       NOTE:

    HP recommends creating a PIN to secure the email profile.

       NOTE:

    When a PIN is created, it must be entered on the printer control panel each time the profile is used to send a scan to email.

11. To configure optional email preferences, complete the following fields in the E-mail Message Preferences area:

    1. From the Maximum Size for E-mail Message Attachments drop-down, select the maximum size for email message attachments.

          NOTE:

       HP recommends using the default file size of Automatic for the maximum size.

    2. To automatically copy the sender on email messages sent from the profile, select the Auto CC checkbox.

12. Review all the information, and then click one of the following options:

    • Save and Test: Select this option to save the information and test the connection.

    • Save Only: Select this option to save the information without testing the connection.

    • Cancel: Select this option to quit the configuration without saving.

Please try assigning a static IP to your printer and check if the issue persists.
 
 Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen, you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.

Refer this article to know more information about how to scan to email from the printer. Click Here

Let me know if this works!
Have a great day ahead! 🙂

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!