Pages scanned from Document Feeder are slanted

[lboraz]

Hello, when i scan using the Document Feeder pages are slanted. How do i fix this? Please note that rotating the page*afterwards* is not an option, because the pages are so crooked that part of the content is lost (=not scanned).

This happens with any number of pages, even with 1 page.

[Betty0610]

@lboraz

Welcome to the HP Support Community.

If your printer has an automatic document feeder (ADF), dust or paper residue on the rollers or separator pad inside the ADF can result in scan quality issues. Open the ADF, then clean the ADF rollers and separator pad.

NOTE: 

The location of the ADF rollers might be different depending on your printer, but the following steps still apply.

1. Gather the following materials:

   • A clean, lint-free cloth, or any cloth that does not come apart or leave fibers

   • Distilled, filtered, or bottled water (tap water might damage the printer)

2. Remove the original document from the ADF.

3. Turn off the printer.

4. Disconnect the power cord from the rear of the printer.

5. Open the ADF cover.

6. Find the paper pick rollers and the separator pad inside the ADF.

   Figure : Example of the paper pick rollers and separator pad in a LaserJet printer

   

   Figure : Example of the paper pick rollers and separator pad in a OfficeJet printer

   

7. Lightly dampen a clean, lint-free cloth with filtered or distilled water, then squeeze any excess liquid from the cloth.

8. Use the damp cloth to wipe any residue off the paper pick rollers and the separator pad.

9. Leave the ADF cover open for two minutes to allow the paper pick rollers and separator pad to dry.

10. Close the ADF cover.

11. Reload the original document print side up in the document feeder tray. Gently slide the document into the printer as far as it can go.

12. Slide in the paper width guides until they are snug against the paper.

    Do not push the paper width guides in so far that they bend the paper.

13. Reconnect the power cord to the rear of the printer.

14. Turn on the printer, then try to scan.

Try a firmware update: https://support.hp.com/in-en/document/ish_1776648-1643972-16

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!