• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Note: From May 1, 2024, the HP Scan and Capture app will no longer be available (retired) in the Microsoft Store and HP will not release any further app updates. Alternatively, you can download HP Smart from the Microsoft Store. For more information on how to set up your printer using the HP Smart app, go to HP printer setup (HP Smart app).
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended
HP OfficeJet Pro 9025e All-in-One Printer

When I scan and make copies, there is a part of the sheet that comes out black with some colored lines. Here is a test of the scanner.

 

PRUEBA ESCANER.jpeg

1 REPLY 1
HP Recommended

Hi @integrad,

 

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

 

If your HP OfficeJet Pro 9025e All-in-One Printer is scanning and copying with black streaks and colored lines, this suggests there might be an issue with the scanner hardware or the scanning software. Here’s a step-by-step guide to troubleshoot and resolve this problem:

1. Clean the Scanner Glass

Turn Off the Printer:

  • Ensure the printer is turned off and unplugged to prevent any accidental damage.

Open the Scanner Cover:

  • Gently lift the scanner lid to expose the glass surface.

Clean the Glass:

  • Use a soft, lint-free cloth and a mild glass cleaner or a solution of water and vinegar.
  • Wipe the glass surface carefully to remove any dust, smudges, or debris.
  • Make sure to also clean the white strip (scanner calibration strip) that runs along the edge of the glass.

Dry the Glass:

  • Use a dry part of the cloth to ensure there’s no residue left.

Close the Scanner Cover:

  • Close the lid and plug the printer back in.

2. Check for Paper or Ink Issues

Inspect the Scanner Bed:

  • Check the scanner bed for any obstructions or foreign objects that could affect the scan quality.

Verify Ink Cartridges:

  • Ensure the ink cartridges are properly installed and not empty.
  • Replace any low or empty cartridges.

3. Update Printer Firmware and Drivers

Update Firmware:

  • Visit the HP Support website and search for firmware updates for your HP OfficeJet Pro 9025e.
  • Download and install the latest firmware if available.

Update Drivers:

  • Download and install the latest printer drivers from the HP Support website.

4. Perform a Printer Reset

Power Cycle:

  • Turn off the printer and unplug it from the power source.
  • Wait for about 60 seconds, plug it back in, and turn it on.

I hope this helps.

Take care and have a good day.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

 

Rachel571

HP Support

.
Sneha_01- HP support
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.