When I scan, using the ADF the scan is skewed as if the paper is hanging up somewhere

[Stan562]

Everything seams to work correctly, no jams or errors. The scanned document just isn't straight.

[Dragon-Fur]

@Stan562 

Welcome to the HP Community --

I had a (recently retired) OfficeJet Pro 9025 --

I really liked that printer...

Printer was always fussy about being kept clean --

• Sparkling clean = good
• Least little bit not-clean = not-so-much

The ADF was always fussy about papers - had to be aligned (stacked) just so and the guides had to be tight but "not too much".  Paper made a big difference, too - regular, high-quality decent condition paper scanned better than thin, slightly wrinkled or curled paper.  Glass nice and clean.

Perhaps a good cleaning will help --

Be sure to clean the flatbed (glass) to prevent little bits of "drag"

HP printers - Automatic document feeder does not pick paper or feeds too many sheets

and

HP OfficeJet 8010, Pro 8020 and 8030 Printers - Paper jam error

====  ====  ====  ====  ====  ====

References / Resources

HP Printer Home Page - References and Resources

Learn about your Printer - Solve Problems

“Things that are your printer”

When the website support page opens, Select (as available) a Category > Topic > Subtopic

NOTE: Content depends on device type and Operating System

Categories: Alerts, Troubleshooting, Ink & Paper, HP Software / Drivers / Firmware Updates , Setup & User Guides, Product Specifications, Account & Registration, Warranty & Repair

Open 

HP OfficeJet Pro 8025e All-in-One Printer  

Thank you for participating in the HP Community --

People who own, use, and support HP devices.

Click Yes to say Thank You

Question / Concern Answered, Click my Post "Accept as Solution"

[Stan562]

Thanks for your help. I paid closer attention to how the side guides were set and that has resolved my issue