hp printer problem

[KUL21261]

HP Officejet Pro 8025e has problem scanning. It is printing but scanning is unavailable.

[Meghana_10]

Hello @KUL21261, Welcome to the HP Support Community. 

Thanks for reaching out about your query regarding the HP Officejet Pro 8025e printer. 

We appreciate the opportunity to assist you and are glad we could help work toward a resolution. We hope our support has been valuable.

To help us get started on resolving your issue, could you please try a few troubleshooting steps provided below so that I can assist you further?

1. Restart devices

• Restart your computer or mobile device and the printer to clear any error states. If you are using a network printer, restart the router.
• If your printer connects to a Wi-Fi network, disconnect your computer or mobile device from the network name (SSID), and then reconnect it to the same network name your printer is connected to.
• If the printer is available and has a ready status, the issue is resolved. You do not need to continue troubleshooting.
• Press the power button to turn off the printer. If the printer does not turn off, disconnect the power cord from the printer and from the power source.
• Turn off the computer or mobile device that you are attempting to print from.
• If the printer was set up on a network wirelessly or with an Ethernet cable, restart the router.
• If necessary, reconnect the power cord to the printer and to a wall outlet, and then turn on the printer.
• Note: HP recommends plugging the printer directly into a wall outlet.
• Turn on the computer or mobile device.
• If the printer connects to a network, check the connection to make sure the same network is used by the printer and the device.
• Computer or mobile device: Open the list of available networks and make sure it is connected to the correct network.
• Printer: Check the Wireless light on the control panel. If it is solid blue, the printer is connected.

2. Reset the printer

• Reset the printer to recover from printer errors or failures.
• If your printer has a rechargeable battery, remove it.
• Press the power button to turn off the printer. If the printer does not turn off, disconnect the power cord from the printer.
• Unplug the power cord from the power source.
• Wait 60 seconds.
• Connect the power cord directly to a wall outlet and to the printer.
• Turn on the printer to complete the reset.

Take care and have an amazing day!