• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Note: From May 1, 2024, the HP Scan and Capture app will no longer be available (retired) in the Microsoft Store and HP will not release any further app updates. Alternatively, you can download HP Smart from the Microsoft Store. For more information on how to set up your printer using the HP Smart app, go to HP printer setup (HP Smart app).
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended
Pavilion?
Microsoft Windows 10 (64-bit)

When copying a document or photo but not an id cd from the printers control panel, every thing comes out red. Sending from computer, smartphones, tablets, all is ok. Printer reports from control panel are in black! I have reset to factory standards to no avail. The problem started about 2 months ago and would happen from PC, smart phone, etc. Found out that I had to make sure the printer seleced was officjet pro 6970 PCL-3 (network). If I used officejet pro 6970 it would print red! (They are the same physical printer!)

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

in doing further testing, I discovered the the blue ink was not showing up on any reports. I replaced with a new cartridge yo no avail. will replace printer as it is way out of warranty.

thank you for your help 

View solution in original post

7 REPLIES 7
HP Recommended

@hazel16

 

Welcome to HP Community

 

Are you making photocopies from the Scanner Glass or the ADF?

 

I suggest you check the settings

  1. Touch Copy, Copy Document, or Copy Photo on the printer control panel, and then select any available basic settings that apply to your copy job.

  2. Touch Settings or the gear icon .

    NOTE: You might need to scroll down the control panel screen to access all settings. Available settings vary by printer model.
    • Paper Type: Select the type of plain or photo paper you are making the copies on.

    • Quality: Select an available copy quality level.

    • Lighter/Darker or Contrast: If the original is faded or too saturated, make the copy lighter or darker.

    • Optimize or Enhancements: Select the type of item you are copying to improve quality, such as sharpening text and image edges or improving faded colors in photos.

    • HP Copy Fix: Automatic copy quality and skew adjustment tool.

    • Save Current Settings or Set as New Defaults: Retains the selected settings for future copy jobs.

Also update the Firmware from this Link: https://support.hp.com/us-en/drivers

 

You can refer to this Link: https://support.hp.com/us-en/product/hp-officejet-pro-6970-all-in-one-printer-series/8289585/model/1...

 

Keep me posted how it goes 😊

 

 

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.

KrazyToad
I Am An HP Employee

HP Recommended

I am doing the copy from the scanner glass. I have gone through the settings and none of the settings, including the advance pertain to my problem of no black ink when copying from the control panel. Interesting, I had not tried doing the copy through the ADF. I did and it printed BLACK!!! Redid the copy on the glass plate and it still came out red!!!

HP Recommended

@hazel16

 

Please ensure the Scanner Glass is clean. If the issue persists then it could be an issue with the scanner bulb

 

I would request you to contact  HP Support for Service Options

 

Click on this link - https://support.hp.com/us-en/contact-hp?openCLC=true and select your Country to get the Contact details for HP Support

 

Thank you 😊

KrazyToad
I Am An HP Employee

HP Recommended

Just to double check, I cleaned the glass and it did not make a difference. I might also add the when I used the ADF, it printed in black, so not sure how it could be the glass or bulb because the ADF copying also uses the glass and bulb. However, there is a difference in processing in the ADF mode. The scanner and bulb don't move when using ADF, but does when doing a copy from the glass. sounds like a different "applicatio/printer process/subroutine" is used for the ADF?

HP Recommended

@hazel16

 

This is a Hardware issue. Please contact HP Support for Service Options 

 

Click on this link - https://support.hp.com/us-en/contact-hp?openCLC=true and select your Country to get the Contact details for HP Support

 

Thank you

KrazyToad
I Am An HP Employee

HP Recommended

in doing further testing, I discovered the the blue ink was not showing up on any reports. I replaced with a new cartridge yo no avail. will replace printer as it is way out of warranty.

thank you for your help 

HP Recommended

@hazel16

 

Thanks for keeping me posted

 

Do visit our HP Support Community and drop us a message anytime you need help 😊

KrazyToad
I Am An HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.