scanner light in constant blink mode

[Dachs1]

scanner light bar in constant blink once a second.  concerned whether this is normal or not.  My hp 7602 does not do this.

[Hawks_Eye]

Hi @Dachs1 

Welcome to the HP Support Community! 

Thanks for posting your query! We're here to help you get back up and running.

The constant blinking of the scanner light bar on your HP Smart Tank 7001 is not typical behavior. 

Normally, the scanner light should only activate during scanning or copying tasks. 

Here are some steps to address this issue:

Check for Firmware Updates:

• Visit the HP Support website to ensure your printer's firmware is up to date. Firmware updates often resolve such glitches.

Reset the Printer:

• Turn off the printer and unplug it from the power source.
• Wait for at least 60 seconds, then plug it back in and turn it on. This can sometimes clear minor errors.

Inspect Power Settings:

• Ensure the printer is not set to any special mode, such as an eco mode or fast scanning mode, which might keep the scanner light active.

If this solution hits the spot, please come back and click "Accepted Solution" to help others find the answer. And if you'd like to say thanks, select "Yes" on the bottom left of the public post, as that would make our day! 

Take care, and have an amazing day!

Regards, 

Hawks_Eye