-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Sprocket
- Re: Sprocket Will Not Turn On

Create an account on the HP Community to personalize your profile and ask a question
08-13-2022 08:37 AM
Hello,
I am having this same issue. My Sprocket will not turn on. I have charged it for a full day. The light on the back blinks red during charging. The unit will not turn on and the LED light on the front never lights up. I have tried all of the instructions to reset it using the inside reset button, etc. I have only used the printer a few times and it has been several months since using it last, but now it will not work. Can you please send me service options? Thank you.
Solved! Go to Solution.
Accepted Solutions
08-13-2022 11:04 AM
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button
If my answer was helpful please click "Yes" to the "Was this post helpful" question.
08-13-2022 11:04 AM
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button
If my answer was helpful please click "Yes" to the "Was this post helpful" question.
09-27-2022 12:27 PM - edited 09-27-2022 12:28 PM
Hello, I don't know why the post is marked as solved, did you already solved your problem? I am having the same problem now, please can you help me? I already know that "the support for HP Sprocket products is changing"
09-27-2022 04:46 PM
I suggest you contact the (new) Sprocket support as shown in the post I linked above. It is likely that you will need a replacement battery.
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button
If my answer was helpful please click "Yes" to the "Was this post helpful" question.