Desktop Video, Display and Touch

Hello, I have a problem to run Ubuntu linux on the ProOne 600 G5 device.

It's run, but the screen doesn't show console or desktop correctly.

The small one is the ProOne and there is a big display attached (the big display should be on the right side, but it doesn't matter). As you can see, the X desktop on the device has 1600x900 resolution. Down is the top of screen showed again and right side is black. The big dislplay is correct even it's showing piece of FF window. This wrong showing happened inmediatelly after boot, when is just CLI showed.

I tryed use an "edid.bin" file as a kernel parameter (drm.edid_firmware=edid/1920x1080.bin), but screen was just a black in this case (system is running, I can make login thru ssh to them).

I tryed more different parameters for kernel also, but without success. For example:

video=eDP-1:1920x1080@60e
video=eDP-1:1920x1080@60D

i915.preliminary_hw_support=1

i915.alpha_support=1
i915.enable_guc=2
i915.preliminary_hw_support=1

With one of this kernel options or combinations is the result same, or the screen is just black.

My last conclusion is the problem is with display. The "drm.edid_firmware=edid/1920x1080.bin" option force graphics card to run in this mode, but the display doesn't understand(?) this.

I tryed change kernel configuration and recompile it too.

Does anybody know a solution? I am trying google a few days but without success.

Thanks

--

Mareg