-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
HP Recommended
You can configure or make changes to the Polycom Phones configuration through the Phones GUI or the Phones web interface.
The Level of changes depends on the SIP / UC Software Version running on your Phone.
Using your chosen browser, enter the phone’s IP address as the browser address.
The Standard Username is Polycom and the Password used to be 456. More details >here< on the new Password
EDIT: The California legislature has mandated specific requirements for password protection of Internet-connected devices in SB 327, which will become operative on January 1, 2020.
Note: some of below Information is only valid running UCS 3.3.x or newer!
Changes made through the Phones GUI are written to the override file (highest priority) stored on the Provisioning Server.
NOTE: These changes remain active and will take precedence over the configuration files stored on the provisioning server until Reset Local Configuration is performed!
Changes made through the web interface are written to the override file (2nd highest priority) stored on the Provisioning Server.
NOTE: These changes remain active and will take precedence over the configuration files stored on the provisioning server until Reset Web Configuration is performed!
The precedence order for configuration parameter changes is as follows (highest to lowest):
• User changes through the phone’s user interface (written to the server as <mac>-phone.cfg)
• Web configuration through a browser (written to the server as <mac>-web.cfg)
• Polycom CMA system
• Configuration files loaded from the Provisioning Server
• Default values (included in the UC Software or sip.cfg / phone1.cfg pre UC Software)
> UCS 4.0.x
Since the introduction of the UCS 4.0.0 Software the possibility to import a configuration file was introduced.
This is useful in order to add configuration changes to an individual phone with Parameters that are not available to change via the Web Interface or the Phone GUI.
The expected format would be an XML file with the .cfg as a file extension.
Mar 08, 2013 Question: Where can I download configuration files from or create these myself?
Resolution: Please check => here <=
