VVX301 call lists(missed calls) screen shows sip:6921@5.0.0.83, rather than 6921

[Anonymous]

Product: VVX 301 DESKTOP PHONE,POE (P/N: 2200-48300-025)
Description: polycom VVX301, VERSION:5.9.7.11143

In the call list of the VVX301 screen, It shows sip:6921@5.0.0.83 as the calling party, rather than just 6921 as the caller.

I wish only 6921 shows in call lists screen, not sip url, how can I do? Thanks.

[SteffenBaierUK]

Hello @ranran ,

welcome to the Polycom Community.

Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.

This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.

As a reminder the basic information asked for:

• Provide the exact Software Version of your Phone
• Provide the Phone Model
• Provide the Call Platform (aka openSIP,Skype for Business Online, Skype for Business on Premise, Lync)
• Additional Polycom Infrastructure (RPRM,PDMS or BToE)
• If applicable provide a backup of the phone in question

UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup. Please rename into .TXT or Zip the file to attach.
Since UC Software 5.9.0 simply provide this via the Web Interface Diagnostics > Download Support Information Package

• If possible provide a Log and either attach them or use the Code Tag.Consult the Troubleshooting Section found within the FAQ if applicable
• If possible provide the MAC Address or Serial of the device
• Provide details for example if the issue is a day 1 issue or only happened after an upgrade or any other relevant details
• For questions around Support please check here

Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition providing all details at the same time allow us to check logs or look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.

Some of the yet unknown settings on your phone may cause what you are seeing so it is of utter importance to provide the above.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

[Anonymous]

phone type: VVX 301
3111-48300-001 Rev:A
MAC: 64:16:7F:48:3A:45
UC software version: 5.5.2.9374
upgrade software version: 5.7.2.21930

[SteffenBaierUK · Accepted solution]

Hello @ranran ,

I suggest you test this with a currently supported software version like UC Software 5.9.1 or 5.8.3 and then report back.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier