• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP PROONE 400 G2 TOUCH
Microsoft Windows 10 (64-bit)

I have HP PROONE 400 G2 TOUCH with preinstalled Windows 10 Pro. My HDD failed and i put SSD. I installed windows 10 pro using Windows Creation Tool and after first restart i got message "Boot Device Not Found" (3F0). I tried everything and i find out that after i get into BIOS and save changes it boots to the windows. It completed windows setup but after next restar i got same message again. So for now, only solution to get to the windows is that i go to the BIOS, save changes and then i get into windows. I hope someone can help me

 

P.S. i found similar thread and he said that he found solution on youtube video but when i click on link i get message Video Unavaible (https://h30434.www3.hp.com/t5/Notebooks-Archive-Read-Only/Boot-device-not-found-Hard-disk-3F0/td-p/4...)

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@aldinze 

 

This is a long shot but would you have an Intel Pro2500 SSD installed???

 

REO

View solution in original post

10 REPLIES 10
HP Recommended

Welcome to the HP Support Community  @aldinze 

 

Is your BIOS upto date???

 

HP ProOne 400 G2 System BIOS (N13)

 

https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-proone-400-g2-20-inch-touch-all-in-one...

 

REO

HP Recommended

BIOS version is 2.03 01/07/2016

 

 

i ll try now to update BIOS

HP Recommended

I tried to update BIOS through windows, everything went ok and i told me to restart pc, when restarted i got message that it cant find BIOS files to update...  Then i gone to BIOS and updated directly from it and now BIOS version is 02.36. After update it booted to windows, when i restarted same message "no boot device".....

HP Recommended

@aldinze 

 

This is a long shot but would you have an Intel Pro2500 SSD installed???

 

REO

HP Recommended

yes 😮    here is exact model   "SSDSC2BF180A5L"

HP Recommended

@aldinze 

 

WOW

 

I hope this is it???

 

Advisory: HP Desktop and Notebook PCs - Intel Pro2500 SSD May Fail to Boot; Error 3F0 Is Displayed:

 

https://support.hp.com/us-en/product/hp-proone-400-g2-20-inch-touch-all-in-one-pc/7638343/document/c...

 

Intel Solid State Drive (SSD) Firmware Update:

 

https://ftp.hp.com/pub/softpaq/sp82501-83000/sp82528.exe

 

REO

HP Recommended

i cannot update firmware on this disk, i tried everything, nevermind i ll get new ssd on monday and i ll tell you if that solved the problem

HP Recommended

@aldinze 

 

I was hoping we got to it in time???

 

In the "Advisory" it said:

 

The drive may be detected intermittently and the OS may load after several attempts to boot up, however the drive eventually fails to be detected.  

 

Let us  know the result of replacing the SSD.

 

REO

HP Recommended

I replaced that intel disk with kingston a400 and everything is ok now. Thanks for help 😉

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.