• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
HP E24m G4 FHD USB-C Conferencing Monitor

Hey! I have recently purchased a HP E24m G4 FHD USB-C Conferencing Monitor, it works fine with one of my HP laptops (running Windows 10 enterprise) via USB-C connection alone - but when it comes to using it with either of my two other laptops (both running Windows 11 standard - one HP, one ASUS) it doesn't send display from my laptop to my monitor - it does pick up the USB ports and receive audio though all through the USB-C connection, just doesn't send video. I have another (slightly older) HP docking monitor that connects via USB-C and that works fine with the Windows 11 laptops (the monitor shows up as "generic PnP device" in device manager). With the new conferencing monitor the device only shows as an audio device and no other monitors are shown in device manager.

 

I have tried all of the common fixes (new drivers, uninstalling existing ones, BIOS update etc....) but to no avail, I seem to think that it is something to do with windows 11 or possibly there being a driver issue with this new monitor? 

 

Well I hope that has covered all of the info that would be needed on the issue, hopefully someone has a solution out there someone 🙂

3 REPLIES 3
HP Recommended

@Mapex17 

 

What is your HP Windows 11 machine ? What is your HP Windows 10 machine ?

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




HP Recommended

Hey! Thanks for getting back to me.

 

Windows 10 Machine: HP ProBook 440 G6 (i5 processor, 14” screen)

 

Windows 11 Machine: HP Laptop 14s-dq1xxx

HP Recommended

@Mapex17 

 

What is your HP Laptop 14s-dq1xxx (xxx can be from 000aa to 999zz). It should have SAME ports as the following machine

 

                HP Notebook 14s-dq1037tu

 

It ONLY has 1 USB 3.1 Gen 1 Type-C™ (Data Transfer Only, 5 Gb/s signaling rate) port which does NOT support Alt mode nor Power Delivery. You can NOT use it to

  • Charge your machine.
  • Connect to an external monitor with/without hub/dock/adapter

 If you wish to connect 2 external monitors (only), you can use


   Monitor 1: HDMI direct cable

   Monitor 2: Using a Displaylink Certified USB-A to HDMI adapter such as  USB to HDMI Adapter


For more connectivity, please use


                    True Universal Docking Stations

 

The  HP ProBook 440 G6 has different USB-C port.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.