cancel
Showing results for 
Search instead for 
Did you mean: 

Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
Idrismca
New member
1 1 0 0
Message 51 of 55
9,067
Flag Post
HP Recommended

Solved!

Disable HP drive encryption on boot

Perfect this solution by cosminidic works perfectly well... Superb thank you.
0 Kudos
cam99
Level 1
7 5 1 0
Message 52 of 55
8,998
Flag Post
HP Recommended

Solved!

Disable HP drive encryption on boot

The file is now password protected on the unzip.

 

If you try and unzip it from Windows 7 it will fail.  On the first PDF

I have used 7zip and it askes for the password. So I tried blank and password no luck

 

Does someone have the files without the password?expand file password.PNG 

0 Kudos
cam99
Level 1
7 5 1 0
Message 53 of 55
8,985
Flag Post
HP Recommended

Solved!

Disable HP drive encryption on boot

Found the answer I was looking for  in here

 

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04677911&sp4ts.oid=5405376

 

This got me back from a black dos screen with the error

 

BCD Error

Status: 0xc0000098

to

BCD Error

Status 0xc000000f

And then fixed

 

I had to run the solution twice and set the attributed back to system and hidden on the "BCD" file.

This solution also requries using Windows PE.

This showed the drive where my normal Boot disk wouldn't

0 Kudos
Pavon_roberto
New member
1 1 0 0
Message 54 of 55
8,850
Flag Post
HP Recommended

Solved!

Disable HP drive encryption on boot

I install hp security se including encryption. Stbthe end of the installation i restart my win10 and a new screen betwen BIOS an windows apear asking por password.. I put the right pass and i expect that the windows startup screen appear but only a black screen with a blinking tilt IN the top left side of the screen appear..
Whats happen? Its the firs reboot after instalación.. Its normal? I nedd yo wait or something happening?

I appreciate your help
0 Kudos
Woot_Woot
New member
2 2 0 0
Message 55 of 55
913
Flag Post
HP Recommended

Solved!

Disable HP drive encryption on boot

Hi I found the solution by accident.

 

To get rid of hardware encryption warnings on an ssd drive:

 

 

Go into BIOS -> Storage -> Storage Options

Change sata emulation from" Raid+AHCI" to "IDE"

Hit F5 to save changes

 

Just for giggles try and switch sata emulation back to "RAID + AHCI"

 

A warning message about OPAL appears.... Do not hit ok or F5....

 

Hope this helps someone

0 Kudos

Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation