cancel
Showing results for 
Search instead for 
Did you mean: 
JODY-H
New member
3 2 0 0
Message 1 of 7
192
Flag Post

Solved!

PRINTER PRINTS ONE PAGE, SAYS ITS JAMMED, I HIT OK, IT PRINTS THE NEXT PAGE. SAME THING EVERY PAGE

HP Recommended
CFM1415 FNW
Microsoft Windows 10 (32-bit)

MY PRINTER WILL PRINT ONE PAGE, SAY ITS JAMMED (IT'S NOT), I HIT OK, IT PRINTS THE NEXT PAGE, SAYS IT'S JAMMED (IT ISN'T)

REPEATS THIS PROCESS WITH EVERY PAGE.   I TRIED RESETTING IT.  NO CHANGE

6 REPLIES 6
east2100
Level 8
Level 8
1,069 1,053 96 175
Message 2 of 7
Flag Post
HP Recommended

Replace the pick-up roller and it'll be fine.

Repairatrooper
Level 12
Level 12
7,193 7,119 759 1,953
Message 3 of 7
Flag Post
HP Recommended

Based on the age of the printer @east2100  has in most cases hit the nail on the head. One thing to listen for to confirm is if you hear the sound of the pickup roller several times when trying to feed a page. 

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


JODY-H
Author
New member
3 2 0 0
Message 4 of 7
Flag Post
HP Recommended

THANK YOU BOTH FOR YOUR QUICK RESPONSE.  JUST TO BE CLEAR, IT DOES PUCK UP THE SECOND PEICE OF PAPER EVERY TIME.  IS THAT STILL THE ROLLER PROBLEM?

Reply
0 Kudos
Repairatrooper
Level 12
Level 12
7,193 7,119 759 1,953
Message 5 of 7
Flag Post
HP Recommended

If it does not struggle to feed the page then more likely you have a size mis-match error. The size that you have set on the printer itself (through the printer control panel) does not match what your document is set to print on in the driver or program. For instance, the printer is set for A4 but the document is letter size. Due to the slight difference in size this can cause the printer to think that there is paper jammed even when it has properly exited. Check your settings.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


Reply
0 Kudos
east2100
Level 8
Level 8
1,069 1,053 96 175
Message 6 of 7
Flag Post
HP Recommended

Yes, that's exactly what the CM1415/CP1525/CP1215/CM1312/M276..... will do, after the first page sent into machine it'll continue to grab the second one and send it to the needed distance to reach a sensor there with only one shot if the top edge of the page can't go far enough to touch the sensor then it shows jam and waiting for your pressing OK to continue the processing.

That's all what these HP printer did.

Replace the worn out pick-up roller and it'll be fine.

I've been doing that more than one hundred times till now and still doing that from time of time when needed.

JODY-H
Author
New member
3 2 0 0
Message 7 of 7
Flag Post
HP Recommended

THANK YOU VERY MUCH.  I WILL LET YOU KNOW IF IT WORKS.  

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation