to resolve an error 99.02.30 with printer LaserJet 600 M603?

moud1 · ‎02-07-2020

I have serious problem with my printer HP LaserJet 600 M603. because of an error 99.02.30 my printer is out of service how can I do to resolve this problem

Repairatrooper · ‎02-07-2020

Most 99 errors are caused by either a failed hard drive or corrupt OS. The standard drive in these units is a 8gb solid state drive with a SATA connector. It is mounted to the door of the formatter. You can run diagnostics from the preboot menu to test the drive but in my experience the drive is likely bad. You can use any SATA hard drive as a replacement, but you will lose the ability for encryption of data on the drive if the drive does not support self encryption.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Mans · ‎02-07-2020

@moud1

Hello,

Reload the firmware. Current firmware can be downloaded from FutureSmart Bundle Version 3.9.6 - HP LaserJet Enterprise M601/602/603 Series Printer FIRMWARE - HP.... using a USB flash drive and the Preboot Menu.

For instructions, see Update the firmware.

If the issue continues, contact HP technical support to perform more complex troubleshooting steps.

Do not hesitate to contact us in case of need.

Best regards,

I'm not an HP employee. Did this message answer your question? Include it below as an Accept As Solution! Did you find this message useful? Click on the thumbs up set to give a Compliment! Follow us on Facebook Assistance customers HP.

Create an account on the HP Community to personalize your profile and ask a question