Microphone pickup betwwen Trio C60 & Studio X70 VC bar

[Alfredlaw]

Hi team, 

I will deploy a Studio bar X70 system and would like to pair a extra Trio C60 for microphone pickup.

i can see technically works from Poly documentaiotn. 
https://docs.poly.com/bundle/polypartnermode-ag-current/page/pairing-a-poly-trio.html

and i have 2 questions com up

1. When both X70 & C60 paired up, will all the microphone in each device works together during a VC call? or only 1 side of microphone will dominate the microphone pickup?

2. when X70 & C60 pairing completed, and i disconneted the C60. Do i need to do any pairing again when i reconnect the C60 back? 

See anyone can answer my question. 
Thank you 
Alfred. 

[SteffenBaierUK]

Hello @Alfredlaw ,

welcome to the HP Poly community.

The Trio Microphones are used. If you disconnect the device and re-connect, as long as the local paired state is not deleted, reconnecting will auto-pair.

Best Regards

Steffen Baier

[Alfredlaw]

hi Steffen, 

to extend the question, so when the C60 disconnected, will the Mic pickup auto change back to the X70?

thank you
Alfred

[SteffenBaierUK]

Hello @Alfredlaw ,

Yes it will.

Best Regards

Steffen Baier

[Alfredlaw]

Hi Steffen,
Thank you for the reply, and here more question to come,
when C60 pair up with X70, i assume the audio also comes from C60 internal speaker , 
is that correct? 

may i say the result be like below?
scene 1 - C60 pair up with X70,  C60 microphone pickup and built in speaker will be used.
scene 2 - C60 disconnect (not unpair), the microphone and speaker will back using from X70 .

next, 
if i using 1x C60 to pair up with X70, can i at the same time adding the C60 Expansion mic for microphone pickup?
https://www.poly.com/content/dam/www/products/support/voice/trio/setup/trioc60-setup-sheet.pdf

Besides, i have another question of using  expansion microphone (p/n 2200-69631-001
Does X70 only allow connect 1 x wired expansion micophone? 
https://www.poly.com/content/dam/www/products/support/video/studio-x/setup/studio-x52-table-mic-qsg....

[SteffenBaierUK]

Hello0 @Alfredlaw ,

Welcome back to the HP Poly community.

For the C60 you can select in the Web UI the C60 to be the speaker as well or use the TV Speakers / Device itself.

The C60 expansion Microphones can be used as well.

You can only connect 1x wired Microphone to the Studio X50/X52 or X70. The IP Microphones are not officially supported. They do work but support for these can be withdrawn at any moment and this is not a supported scenario.

I would suggest you work with a Poly Reseller in your region for any detailed questions and answers as we are only volunteers here to provide some help but at least not for myself as a technical advisory role.

Best Regards

Steffen Baier