cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
Level 6
562 552 34 46
Message 1 of 3
211
Flag Post

Solved!

ADF does not eject Last page

HP Recommended
OfficeJet Pro 8715
Microsoft Windows 10 (64-bit)

When making copies from ADF the copies come out correct, But the ADF does not fully eject the last page.

It brings the page out half way, then pulls it back in a little.

2 REPLIES 2
Highlighted
HP Support Agent
HP Support Agent
14,332 14,302 939 1,115
Message 2 of 3
Flag Post
HP Recommended

Hi @B_Will

Welcome to the HP Support Community. I'd be happy to assist you with the issue you are facing with the ADF

 

This seems like a hardware issue with the rollers or the ADF mechanism. Let us try these steps:

 

Reset the printer

  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Wait at least 60 seconds.
  3. Reconnect the power cord to the rear of the printer.
  4. Turn ON the printer, if it does not automatically turn on.
  5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

 

Update the printer firmware

Click here to know different methods of updating printer firmware.

 

Also, perform the troubleshooting steps mentioned under 'Printer does not pick up paper from the ADF' in this document. These steps apply to the current issue you are facing with the ADF. 

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

KUMAR0307
I am an HP Employee

Author
Level 6
562 552 34 46
Message 3 of 3
Flag Post
HP Recommended

Power cycle with the printer on fixed it.

Thanks

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation