Printer erroneously reports not encrypted wireless network

[Roos10]

After installing a booster to the wifi network, the printer reports that it cannot connect to wifi network. It finds the network but erroneously reports that the network is not encrypted. Connection to network fails.

[Betty0610]

@Roos10

Welcome to the HP Support Community.

Which Printer do you have?

Thanks 🙂

[Roos10]

I have a HP Envy 5010

[sandytechy20]

@Roos10

Follow the below steps to fix the issue:- 

Restore the printer to the original network settings

1. From the Home screen, touch (Wireless) and then touch ( Settings ).

2. Touch Restore Network Settings, and then follow the onscreen instructions.

3. Print the network configuration page and verify that the network settings have been reset.

Update the printer firmware

Here are the steps:- Click here

Use the Wireless Setup Wizard from the printer control panel display to set up wireless communication.

1. On the printer control panel display, from the Home screen, touch ( Wireless ).

2. Touch ( Settings ).

3. Touch Wireless Setup Wizard or Wi-Fi Protected Setup.

4. Follow the display instructions to complete the setup.

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.