-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Mobile Printing & Cloud Printing
- Re: Server Connection Error: 403

Create an account on the HP Community to personalize your profile and ask a question
03-02-2020 03:07 PM
Trying to use scan-to-email feature on my Photosmart 5520. Appears that the printer can connect to the internet, but every time after I select Document or Photo to scan I get a Server Connection Error: 403 with a message that there was a problem connecting to the server.
I've set the manual DNS Server address per previous posts on here, but haven't had any success resolving this issue.
Any ideas to fix this?
Solved! Go to Solution.
Accepted Solutions
03-05-2020 04:29 AM
@theyawns, Welcome to HP Support Community!
I would like to help you with the Server Connection error you are experiencing. It sounds like you are using a scan to email app from the front panel of the printer if this is to be true follow the steps below-
1. Obtain your printer's IP address
a. This can be done by pressing the wireless icon on the printer.
2. Enter the printer's IP address in a browser.
3. Select the network tab at the top of the page.
4. On the left select networking.
5. Select Network Address (IP)
6. Select Manual DNS Server
a. Manual Preferred DNS should read 8.8.8.8
b. Alternate DNS Server should read. 8.8.4.4
7. Select apply you might get a warning just select okay.
Update the printer firmware
Download available firmware updates from the HP website
With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware.
If the issue still persists try the steps recommended below-
1. Select Web Services on the front panel., then Settings.
2. Select 'remove web services' and wait for the services to be eliminated.
3. Once this is complete, you will return to the home page.
4. Select the Web Services icon on the printer and go through the steps to setup Web Services once again.
5. You will be provided a more recent code. Later on, you can utilize this code to add the printer to your eprintcenter.com/ hpconnected.com account utilizing this code.
6. You may or may not be required to create a different email address.
7. Try another scan to email utilizing the app.
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
TEJ1602
I am an HP Employee
03-05-2020 04:29 AM
@theyawns, Welcome to HP Support Community!
I would like to help you with the Server Connection error you are experiencing. It sounds like you are using a scan to email app from the front panel of the printer if this is to be true follow the steps below-
1. Obtain your printer's IP address
a. This can be done by pressing the wireless icon on the printer.
2. Enter the printer's IP address in a browser.
3. Select the network tab at the top of the page.
4. On the left select networking.
5. Select Network Address (IP)
6. Select Manual DNS Server
a. Manual Preferred DNS should read 8.8.8.8
b. Alternate DNS Server should read. 8.8.4.4
7. Select apply you might get a warning just select okay.
Update the printer firmware
Download available firmware updates from the HP website
With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware.
If the issue still persists try the steps recommended below-
1. Select Web Services on the front panel., then Settings.
2. Select 'remove web services' and wait for the services to be eliminated.
3. Once this is complete, you will return to the home page.
4. Select the Web Services icon on the printer and go through the steps to setup Web Services once again.
5. You will be provided a more recent code. Later on, you can utilize this code to add the printer to your eprintcenter.com/ hpconnected.com account utilizing this code.
6. You may or may not be required to create a different email address.
7. Try another scan to email utilizing the app.
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
TEJ1602
I am an HP Employee
03-26-2020 02:06 AM
PHOTOSMART 5520 e-ALL-IN-One SERIES
Printer is connected to internet.
Each time I try to scan to email, I receive "Server Connection Error 403"
No previous problems.
Can you please tell me how to solve this. I have looked at older forums and tried their suggestions with Manual Preferred DNS without success.
03-30-2020 10:53 AM
Hi @RobertLB
Welcome to the HP Support Community. I'd be happy to assist you with the "scan to email" issue.
Try the steps below to resolve the server error -
1. Select Web Services on the front panel., then Settings.
2. Select 'remove web services' and wait for the services to be eliminated.
3. Once this is complete, you will return to the home page.
4. Select the Web Services icon on the printer and go through the steps to setup Web Services once again.
5. You will be provided a more recent code. Later on, you can utilize this code to add the printer to your eprintcenter.com/ hpconnected.com account utilizing this code.
6. You may or may not be required to create a different email address.
7. Try another scan to email
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
04-10-2020 09:54 PM
I have tried all the suggestions and still keep getting error 403. There is only a problem with scanning to email. Otherwise the printer works fine. I have already uninstalled and reinstalled it several times. No luck.
04-11-2020 12:51 PM
Let's set up scan to email again-
Step 1 Set up Scan to Email -
1.) Click Start, and then click Programs.
2.) Click HP, click the name of the printer, and then click Scan to Email Wizard.
3.) In the Outgoing Email Profiles dialog, click the New button. The Scan to Email Setup dialog opens.
4.) On the 1. Start page, enter the sender's email address in the Email Address field.
5.) In the Display Name field, enter the sender's name. This is the name that will display on the printer control panel.
6.) To require a PIN to be entered on the printer control panel before the printer can send an email, enter a 4-digit PIN in the Security PIN field, and then re-enter the PIN in the Confirm Security PIN field, and then click Next.
7.) On the 2. Authenticate page, enter the SMTP Server and Port Number.
8.) If you are using Google™ Gmail for email service, select the Always use secure connection (SSL/TLS) check box.
9.) Select the Maximum Size of Email from the drop-down menu.
10.) If the SMTP server requires authentication to send an email, select the Email Log-in Authentication check box, and then enter the User ID and Password, and then click Next.
11.) On the 3. Configure page, to automatically copy the sender on email messages sent from the profile, select Include sender in all email messages sent out successfully from the printer, and then click Next.
12.) On the 4. Finish page, review the information and verify all the settings are correct. If there is an error, click the Back button to correct the error. If the settings are correct, click the Save and Test button to test the configuration.
13.) When the Congratulations message displays, click Finish to complete the configuration.
Step 2 Scan to Email -
1.) Load the document on the scanner glass according to the indicators on the printer.
2.) From the Home screen on the printer control panel, touch the Scan icon .
3.) Touch Scan to E-mail.
4.) Touch Send an E-mail.
5.) Select the From address that you want to use. This is also known as an "outgoing email profile."
6.) Touch the To button and select the address or group to which you want to send the file. Touch the Done button when finished.
7.) Touch the Subject button to add a Subject line.
8.) Touch the Next button.
The scan settings will display on the printer control panel screen.
9.) To change any of the scan settings, touch the Settings button, and then select the desired settings.
After selecting the desired settings, continue to the next step.
10.) Touch the Scan button to start the scan job.
Keep me posted!