01-20-2019 05:12 AM - edited 01-20-2019 04:00 PM
After several updates and restores it seems to me that the situation is as follows:
If Windows does not updated to Version 1809 (which was not offered to me after some restores) then you can still roll back the driver to version 126.96.36.199 RevB and everything works as expected.
However after the Windows Version 1809 update the Synaptics 188.8.131.52 drivers gets removed and rolling back to an earlier version gives a very old non precision Windows driver. Then you have to install the Synaptics 184.108.40.206 driver manually through the HP Softpaq sp87984.exe again. The installer tells you that you have to uninstall the Synaptics 19.5.x.x. driver (via add / remove programs) first, which got installed by the Windows update. Thereafter the 220.127.116.11 driver can be installed (reboot required).
Next follow the instructions for installing the n1mgx14w driver from the posts before (reboot required).
This gives you the precision touchpad back.
Then you can update the driver to 18.104.22.168 through the device manager (reboot required).
Maybe it is possible to install the n1mgx14w before the 22.214.171.124 driver to save the last step, but I haven't tested it.
Now you should have the Synaptics ClickPad 126.96.36.199 driver with Windows 1809 (build 10.0.17763) working....
... until the next Windows update. This will install the 188.8.131.52 driver again. You then have to immediately rollback the 19.5.x driver to its previous 184.108.40.206 version before any reboot. Otherwise it will be very difficult to get back to the working state. It took me a very long time and I can't explain how I finally got to the proper setup. Several attempts to get the driver 19.5.x driver uninstalled and replaced by the 19.3. driver failed. I think what helped was uninstalling the 19.5. driver via Windows "add or remove programs" and installing n1mgx14w and 220.127.116.11 without rebooting first. When 19.3.x was working again as precision touchpad, two finger scrolling was broken. Then after some reboots Windows update started to download the19.5.x driver again. But I immediately rolled back to 19.3.x and after a reboot everything worked as expected.
However, I also realized that I also the n1mgx14w driver works fine and 19.3.x is not really necessary, which could avoid and additional fragile installation procedure.
01-22-2019 11:56 AM
The only way to get the Precision Touchpad driver on the Spectre x360 is through the unofficial hack (https://www.windowscentral.com/how-enable-precision-touchpad-drivers) but that could change if this petition to bring the driver officially to the Spectre x360 gets enough signatures, I think 10-20,000 would be enough if not more than enough. Here's the link and please share it: https://www.thepetitionsite.com/279/075/190/stand-up-to-hp-and-demand-precision-touchpads-on-the-spe....
01-22-2019 01:06 PM
Thanks EvenNotOdd. That's a nice idea. I signed your petition, but I am afraid your numbers of signatures are a bit to optimistic. Nevertheless HP should start fixing this anyway even if just a small number of people sign it, since not so many people bothered of it will find this petition.
And its such a miserable thing they do and it would be so easy to fix.
01-22-2019 01:48 PM
You are welcome.
I don't know about the numbers. But from the eye symbol on the left you can see how many people have seen a post. So far about 8500 have seen the initial question. The last posts have less than 1000 views, but within one week that's not too bad. Lets see.
03-26-2019 01:03 AM
We're getting close to the end of March, and still no response from HP.
The Windows presicion driver changes everything about the exprience of the x360, turning it to one of the best laptops on the market.
Leaving it with the old synaptics drivers just makes the whole experience laggy and a real shame.
HP: Please release an updated version that supports Windows PresicionDrivers!!! Its by far more improtant than releasing new failing laptops, keep your real succesful laptops worth it!
04-14-2019 03:22 AM
Anyone know how I can replace the irritating Elan touchpad driver for Microsoft Precision one? I found a hack:
But the link they give for the elan driver:
does not have the autorun.inf file after I extract the zip file.
My touchpad is really trash since an update. It was fine when I got the laptop in December 2018. But recently became really groggy and I got to assume it was following an update.
06-13-2019 03:21 PM - edited 06-13-2019 04:05 PM
I've now managed to reinstall the Lenovo precision touchpad driver on Windows 10 1903 according to my HowTo.
However, to prevent the crappy synaptics driver from being reinstalled I had to block driver installations for my touchpad's device ids using gpedit.msc rather than using the "hide update" tool. Here's how to achieve that:
06-16-2019 05:24 AM - edited 06-16-2019 01:42 PM
Touchpad performance was pretty bad after reinstallting the Lenovo driver on Windows 10 1903 (May Update 2019). I have now found a newer version (Oct 2017) of Lenovo's Precision Touchpad driver. This makes a huge difference when scrolling in Chrome, etc.
EDIT: Unfortunately my updated instructions are now getting marked as SPAM - and are removed when reposting them over and over again. I hope some moderator brings them back ASAP.