-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: ¿Cuál es la versión del PCIe conectado al NVME del portá...

Create an account on the HP Community to personalize your profile and ask a question
09-11-2022 03:32 PM - edited 09-14-2022 11:33 AM
HP Notebook - 15-db0029ns - Ryzen 5 2500U - 2x16 Gb Kingston (NEW) - NVME SAMSUNG 970 EVO PLUS 2TB (NEW)
The connection to the GPU is PCIe 3.0.
I have managed to get the NVME to reach the following speeds, corresponding to a PCIe 2.0 connection:
I would need confirmation of the PCIe version.
Motherboard: HP 84AE (FP5) v. 86.32
Chipset: AMD Ryzen SOC rev. 00
Southbridge : AMD Carrizo FCH rev. 51
BIOS: Insyde F.39 15/07/2022
O.S.: W10 Home x64 21H2
09-11-2022 03:49 PM
Hey @RICMART !
Thank you for visiting our English HP Support Community. We advise you to post your question in English to insure a quick response for the Community.This can also help other users to take advantage of your post, in the case they have the same question.
Or, if you prefer, you can visit the HP Spanish Community (https://h30467.www3.hp.com/). Thank you for your understanding.
Regards,
MayS.
09-11-2022 04:18 PM
Hi, @RICMART
Your PC's NVMe slot is PCIe 3.0 according to the processor specs.
AMD Ryzen™ 5 2500U Processor | AMD Radeon™ Vega 8 Graphics | AMD
The only thing I can think of as to why your Samsung 970 is not running at the full advertised speed would be due to the Slot only being PCIe 3 x 2 instead of 3 x 4.
The drive is running at half of its advertised speed because it can only use two lanes.
09-12-2022 03:19 AM
Thanks for your answer Paul_Tkkanen . Unfortunately it may be so! It appears to be a motherboard architecture issue. In another HP laptop, the 15s-eq0015s, with a Ryzen 7 3700U processor, I managed to get the sequential read performance of the NVME 970 EVO Plus to 3552 Mb/s (3.0 x4).
There should be a motherboard's manual specifying the versions and lanes of each of the expansion slots and the limitations that may apply.
I'm sorry for my bad English, I did my best.
09-12-2022 06:42 AM
You're very welcome.
Your English is just fine. Probably a lot better than my Spanish. 😊
Run the free utility that I zipped up and attached below and it may show you some information about the PCI express lanes in use and other motherboard information.
Unfortunately, the service manual is of no help to us in this matter.
Maintenance and Service Guide HP 15 Laptop PC
09-12-2022 12:20 PM
As can be seen in the report the motherboard has 3xPCI Express x1, 1xPCI Express x4, 1xPCI Express x8 (All v3.0).
The NVMe is connected to a PCIe 4x, but it is running at 2x.
With the information provided by the application (Report), it seems that it should run at x4.
My only question is whether the M.2 slot has 2 or 4 lanes connected to it.
If 2 lanes are connected I will not be able to reach the optimal NVMe speed. In another case, if 4 lanes are connected, the solution could be to install new drivers, when they are released, or to change the configuration, for example, in the system registry. But I don't know if it can be configured.
09-12-2022 12:46 PM
I don't believe there will be anything you can do to get the NVMe SSD to run at its advertised read/write speeds.
Those kinds of devices are plug and play and what you see is what you get.
There are other notebooks such as the 15-da0xxx model series that have the same problem.
The NVMe SSD only runs at 1/2 of its advertised speed.