-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Wobbly diagonal lines with X360 1040 G5 and digitizer HP Act...

Create an account on the HP Community to personalize your profile and ask a question
06-06-2021 07:50 AM - edited 06-06-2021 08:02 AM
Dear Community,
My problem seems to have been described here already in connection with another notebook model, link:
I have not yet been able to find a solution.
I will therefore describe the problem again, especially as it occurs on my computer:
1. I use the HP X360 1040 G5, non-reflective screen with a resolution of 1920 x 1080. I use the pen recommended for this notebook: https://store.hp.com/GermanyStore/Merch/Product.aspx?id=6SG43AA&opt=&sel=ACC
2. horizontal and vertical lines are drawn exactly.
3. diagonal lines and lines deviating from the horizontal or vertical are not drawn straight. Even if I use a ruler for drawing, the lines deviate strongly from the straight ideal and are drawn crooked and humped on the screen.
As a result, my handwriting is also extremely unclear and sometimes barely decipherable. A test carried out on a Lenovo Yoga for comparison purposes leaves no doubt that the HP notebook has a problem here.
I have already implemented the solution of recalibrating the touchscreen linked in the other thread, without success.
I am urgently asking for support in this matter, as I need full functionality for school and study.
Although my Support Assistant shows me a device warranty until 2023, I am openly denied support by HP on this issue. Bad, very bad.
06-08-2021 08:30 AM - edited 06-08-2021 08:38 AM
Ok, let's try it again. This time I took a well-known picture as background for my artwork, let's see if this will be dumped again. All blue lines at the attached picture have been drawn by using a ruler. Only the horizontal and vertical lines are straight. Does nobody has any idea, what's wrong there?
HELP!