• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Here is the solution to resolve for 5 Long and 3 Short Blinks on your HP Laptop Click here to view the instructions!
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP Envy x360 15m bp111dx
Microsoft Windows 10 (64-bit)

I just picked this up second hand.  Are the detailed specs available on the HD web site?

This unit comes with a 1 tb hard drive.  

Can I upgrade it to an NVME M.2 SSD?

 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi:

 

Below is the link to the service manual for your notebook.

 

http://h10032.www1.hp.com/ctg/Manual/c05527167

 

Chapter 1 has the supported drive types.

 

According to the manual, there is a M.2 slot that supports NVMe M.2 SSD's.

 

Chapter 3 does mention a SSD gasket part number which is probably not present in your model...

 

Solid-state drive gasket (not illustrated)    936448-001

View solution in original post

5 REPLIES 5
HP Recommended

Hi:

 

Below is the link to the service manual for your notebook.

 

http://h10032.www1.hp.com/ctg/Manual/c05527167

 

Chapter 1 has the supported drive types.

 

According to the manual, there is a M.2 slot that supports NVMe M.2 SSD's.

 

Chapter 3 does mention a SSD gasket part number which is probably not present in your model...

 

Solid-state drive gasket (not illustrated)    936448-001

HP Recommended

Thanks for the manual.

Can I run the OS off of the the NVMe drive?  and then just use the existing one for storage?

HP Recommended

You're very welcome.

 

Yes, you should be able to, but you will have to remove Windows from the hard drive, otherwise the PC will always want to boot from the 2.5" drive.

HP Recommended

The manual says there is a Phillips PM2.0×2.4 broad head screw holding the memory card in place.  I saw a youtube video of someone installing this memory and the screw was not there.  He was kind of stuck.

I googled looking for this screw and could not find it.

Any ideas on how to get it?  

HP Recommended

Yes, it is probably very hard to get the exact screw size you need.

 

All of the screws I have seen are 2 mm in diameter but the lengths are different, ranging from 2 mm to 4 mm.

 

So, I was doing some searching for you and came up with something that might work.

 

This kit on Amazon has screws that are slightly longer than what the specs indicate...3 mm long instead of 2.4 long.

 

We are talking infinitesimal differences here (0.6mm), but I suppose a miss is as good as a mile.

 

Why I think this kit will work is because it comes with washers.

 

If you had to, you could add some washers either under or over the SSD to add the extra depth (assuming the 3.0 mm length is too long).

 

https://www.amazon.com/mounting-Screws-Laptop-Nvme-Screw/dp/B085FS82BN/ref=sr_1_42?crid=OU0N4IMQB99V...

 

Either that, or go to your a local PC repair shop and see if they have a screw that fill fit from their spare parts inventory.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.