-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Software and How To Questions
- Re: Graphics Card hp compaq 6005 pro microtower

Create an account on the HP Community to personalize your profile and ask a question
04-21-2020 09:49 PM
I am wondering, since this is an old model, how do i change the graphics card on the hp compaq 6005 pro microtower (if i need to replace it to place a new one) where do i place the new graphics card, and how? I have been doing research for maybe two hours but i dont know alot about computers...
Solved! Go to Solution.
Accepted Solutions
04-22-2020 02:25 PM
You're very welcome.
According to the specs, you can install 4 x 4 GB of memory.
You can put the 4 GB chip in either of the 2 empty slots you have. I would put it in the 3rd slot.
04-22-2020 08:35 AM
Hi:
I would get a used but tested and working AMD Radeon HD 6570 or Radeon HD 6450 on eBay.
The HD 6570 is more powerful than the HD 6450.
You can get one pretty cheap nowadays.
Here is the link to the service manual...
04-22-2020 09:20 AM
The graphics card has its own onboard memory, and has no bearing on your PC's memory.
Suggested cards...These were the cheapest I could find from sellers with good feedback...
HD 6450
HD 6570:
04-22-2020 10:09 AM
I dont use both of the connectors on thoes *DisplayPort Output, DVI Output) is my computer compatible with something like
04-22-2020 11:20 AM
Yes.
That one should be fine.
It is going to cover the battery and one of those smaller black PCIe x 1 slots though.
The video card in the black slot next to the white one at the top of the picture, so it is going to be a tight fit.
04-22-2020 01:38 PM
LOL!
That is definitely why the wifi is so bad.