MFP 135W toner going down too fast

[justtyler]

Hi,

I purchased the HP MFP 135W back in November last year and I think in about 2 months I had to change the toner. However, after changing the toner, in about 1.5 months it says the levels are at 30%. I am using the original 107A toners which are rated at 1,000 pages.

I understand that these 1,000 pages aren't necessarily 100% accurate, but according to my page counter, I have printed about 360 pages, which means that I am going through two toners for less than 500 pages? Is this supposed to be normal? Or is there something wrong with my printer/toner? 

I opened up the printer to check if maybe the toner was leaking but it looks clean so I'm not sure what is the issue here. Also, for context, I print mostly documents. I rarely ever print full sized images and my printer quality settings at set at normal and regular resolution.

[Nal_NR]

Hi @justtyler,

Welcome to the HP Support Community. 

I'd like to help!

Perform the steps from this document and see how it goes. 

You may also refer to this document

Also, try updating firmware: Click here

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!