PRINTING BLURRED

[SUNIL215041516]

PRINTING NOT CLEARLY 

[Meghana_10]

@SUNIL215041516, Welcome to the HP Support Community. 

Thanks for reaching out about your query regarding the HP LaserJet Pro MFP M329dw.

We're thrilled to have the opportunity to assist you and provide a solution. We hope our assistance has been helpful! 

If your HP LaserJet Pro MFP M329dw is not printing clearly, here are some troubleshooting steps you can follow to identify and resolve the issue:

1. Check Toner Cartridge Levels:

   • Make sure that the toner cartridge is not low or empty. You can check this from the printer's control panel or through the printer software on your computer.

2. Perform a Print Quality Diagnostic:

   • Many HP printers have a built-in diagnostic tool that can help identify print quality issues.
   • Access this via the control panel on your printer. Look for an option related to "Print Quality" or "Tools."

3. Clean the Printer:

   • Over time, toner particles and dust can accumulate inside the printer, affecting print quality. Use the automated cleaning feature if available, or consult your printer's manual for instructions on manual cleaning.

4. Inspect and Replace the Drum Unit:

   • Inspect the imaging drum for any damage or wear. If it is damaged or worn out, it might need replacement.

5. Check the Print Settings:

   • Ensure that the print settings on your computer match the type of document or image you are trying to print. Check settings like paper type and print quality.

6. Update Printer Firmware:

   • Ensure that your printer's firmware is up to date. Firmware updates can resolve known issues that may affect print quality.

7. Reinstall Printer Drivers:

   • Outdated or corrupt printer drivers can affect print quality. 

8. Reset the Printer:

   • Perform a printer reset by turning it off, disconnecting the power cord for a minute, and then turning it back on.

9. Check for Any Error Messages:

   • Address any error messages on the printer's display panel as these might be indicators of a particular problem affecting print quality.

I hope this helps!

Take care and have an amazing day! 

If you would like to thank us for our efforts to help you, go to the public post and give us a virtual high-five by clicking on "Yes" for the question "Was this reply helpful?" below my message, followed by clicking on the "Accept as solution" on my public post.

Regards,

Meghana