envy 6458e error 0

[Robyn52]

I cannot figure out how to clear error 0 from my HP Envy 6458e.  I went through all the steps with the virtual assistant, including replacing the ink cartridges.  I am hoping someone has some suggestions.  Thank you!

[A_Gayathri]

Hi @Robyn52,

Welcome to the HP Support Community

I understand you are facing a blinking light issue with your printer won't print an orange light blinking  Not to worry I will help you to get a resolution to resolve the issue.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating printer firmware.

HP DeskJet, ENVY 6000, 6400 - Blinking lights and error codes

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!