Error message 62 80 40 during set up on 9010 series

[Jane722]

hp office jet pro 9019 series 962z 

during initial set up I get error message saying event code 62 80 40 printhead appears to be missing, not detected, or incorrectly installed. This is a brand new printer. Help!

[Jay_G24]

Hi @Jane722,

I'd like to help!

Try the below suggestions-

Reset the product

• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the printer.
• Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

Update the printer firmware

Updating the printer firmware might resolve printhead problems. Go to Updating or Upgrading Printer Firmware for more information

If the issue persists, I'd suggest you contact HP in your region regarding the service options for your printer.

Follow the instructions below to reach them:

1) Click on this link - https://support.hp.com/us-en/contact-hp

2) Select your product type below.

3) Enter the serial of your device. 

4) Select the country from the drop-down. 

5) Select the chat or get phone number options based on your preferences. 

6)Fill the web-form and proceed further.

If you are having trouble navigating through the above options, it's most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile name, you should see a little blue envelope, please click on it.  

Have a great day! 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping