HP 3755 not printing correctly after new cartridge, cleaning, and alignment.

[Joshua8]

Hello, I replaced my cartridge and it seemed like the printer was leaving out several lines, or some were only half-printed, when printing from the dialogue box.  If I printed directly from a webpage, it would print perfectly.  I tried cleaning the heads and aligning the printer and the issue persists.  I think that because it can print normally, it may be a software or mechanical issue.  I checked the drivers and they are up-to-date.  Has anyone else had this issue or know how to troubleshoot it?

[Jeet_singh]

@Joshua8,

Welcome to the HP Forums 🙂 I would like to take a moment and thank you for using this forum, it is a great place to find answers. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for First Time Here? Learn How to Post and More.

I see from your post that you are having issues while printing from our HP DeskJet printer. Don't worry we'll work together to help you find a solution.

To provide you with an accurate solution, I'll need a few more details:

Are you using genuine HP Ink cartridges or refilled ink cartridges?

Are you able to make a copy from the printer?

In the meantime, let's try these steps here: 

Please make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

If you are facing any issue while using the printer then try using HP Print and Scan Doctor (PSDR). PSDR is an automated tool which can diagnose and resolve printing and scanning problems. Please go to this link: HP Printers - Using HP Print and Scan Doctor (Windows)  to download and run HP PSDR. Once you open the program, select your printer and click on “Fix Printing” to automatically diagnose and fix the issue.

Let’s first try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.

If the copy comes out bad then I would suggest here is to follow the steps suggested in the support document for - HP DeskJet 3700 Printers - Fixing Poor Print Quality

If the copy comes out fine, then I would suggest here is to do a root level uninstall and reinstall of the printer drivers:

• Press “Windows key” + “r” to get the “Run” window.
• Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
• Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP Officejet printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.
• Please click here to download and install the software.
• Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Could you please respond to this post with the details and with the results of the troubleshooting as this will help me in further assisting you.

Eagerly waiting for your response!

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.