-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- Re: HP officejet 8600 Software will not open

Create an account on the HP Community to personalize your profile and ask a question
01-08-2019 06:26 PM
About a week ago my software stop running on my Dell XPS 8930. The icon is still there on the desktop but when I click on the app it does not open. I can print and the connection is setup for wireless. I use this software to run the scan program. Tried removing app, downloading new software and reinstalling. Also follow the procedures below found on the site ... but it's not working.
- Go to Control panel – Programs and feature – Select all the HP Officejet printer entries and uninstall them.
- Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
- Restart your computer.
- Click the bottom-left Start button on desktop, type device manager in the search box and tap Device Manager on the menu.
- Once in device manager, click on the view tab in the top & choose “Show hidden devices”.
- Then from the device manager list, check the entries under “Printer” – If there are any entries, please right click and choose “uninstall” – In the confirm device un-install pop-up, make sure you select the box which says “Delete the driver software for this device".
- Also, check the entries under "printer queue" and "imaging devices" and repeat the same exercise. Delete any printer entry or any entry which says “Unknown device”.
- Once done, close device-manger. Then press the "windows key" + "r" to get the "Run" window open - Type "exe /s" (there is a space between .exe & /) and press enter.
- Under print server properties, go to drivers - remove any entry there as well.
- Again, go to run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
- Open run again, type “%temp%” and press enter to get the temporary files. Delete all the files here. Skip the items which cannot be deleted.
- Now restart your computer again.
- Open the Run window again, type “services.msc” and press ok to get services window.
- Scroll down to “Remote Procedure Call (RPC)” – right-click and go to properties. Make sure the service is started and startup type is “Automatic”.
- Now scroll up and go to “Function Discovery Provider Host” – right-click and select properties – Change the startup type to “manual” and start the service.
- Repeat the same exercise on “Function Discovery Resource Publication” as well.
- Download and reinstall software
Solved! Go to Solution.
Accepted Solutions
01-09-2019 06:03 PM
Hi,
Can you try this standalone scan software:
HP Scan Extended
http://ftp.hp.com/pub/scanners/HPScanExt/HPScanExt.msi
Once it's downloaded and installed, go to Start > All Programs > HP > HP Scan Extended > Run "HP Scan Extended"
Hope that helps!
Click Helpful = Yes to say Thank You.
Question / Concern Answered, Click "Accept as Solution"
01-08-2019 06:37 PM
Hi
Thanks for using the HP Support Community.
Can you try this:
* *Note that if there are other printers installed, these will need to be reinstalled after this.
Step 1. Uninstall the HP Software from your PC.
Please follow the steps provided to uninstall the printer software in the link: Uninstalling the Printer Software (Windows)
https://support.hp.com/in-en/document/c02259020
Also, please follow the steps provided below to completely remove the printer software from printer properties.
Steps to remove printer driver files from Print Server Properties:
Step 2. Open the Print Server Properties dialog window by doing one of the following:
• Click the Start menu and in the search field type 'printui /s /t2' (without the quotes), and then press Enter or click it in the search list.
• Press WINDOWS-R on the keyboard to bring up the Run window, type in 'printui /s /t2' (without the quotes), and then press Enter or click OK.
• From the Start menu or the Start screen:
• Open Devices and Printers.
• Select any printer and then click "Print server properties" at the top of the window.
• Click on the Drivers tab.
Step 3. Backup your registry before making any registry changes, the following resource will show you how:
https://support.hp.com/in-en/document/c03485724
Step 4. Update the registry using the Reg file below
Note: this will change some printer related policies for your PC):
https://www.dropbox.com/s/avbv56zdgwv7600/kernel.reg?dl=1
Step 5. Right click the Start menu and select Run.
Type Services.msc and press OK.
Locate and stop the Print Spooler service
Step 6. Browse to c:\Windows\System32\spool\drivers.
Rename W32X86 to W32x86.old
Rename x64 to x64.old
Note: if any of these folders fail to rename reboot your PC and then Continue following the steps starting from Step 5.
Step 7. Restart PC.
Step 8. Finally, reinstall the HP Software.
Hope that helps!
Click Helpful = Yes to say Thank You.
Question / Concern Answered, Click "Accept as Solution"
01-09-2019 02:49 PM
This did not help ... still have the same issue. Click on the icon but software does not load. App does not show in Task manager. Even try opening as adminstrator. But I still can print so the printer is installed (wireless)
01-09-2019 06:03 PM
Hi,
Can you try this standalone scan software:
HP Scan Extended
http://ftp.hp.com/pub/scanners/HPScanExt/HPScanExt.msi
Once it's downloaded and installed, go to Start > All Programs > HP > HP Scan Extended > Run "HP Scan Extended"
Hope that helps!
Click Helpful = Yes to say Thank You.
Question / Concern Answered, Click "Accept as Solution"
01-09-2019 06:20 PM
Hi @Gene_W,
Glad to hear that your issue is resolved and all is working well now.
Have a nice day!
Click Helpful = Yes to say Thank You.
Question / Concern Answered, Click "Accept as Solution"