-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
1
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- Hp envy 4520 won’t print in colour from windows 11 no option...

Create an account on the HP Community to personalize your profile and ask a question
06-05-2023 05:22 AM - edited 06-05-2023 05:42 AM
HP Envy4527 - Hp envy 4520 won’t print in colour from windows 11 no option to switch off greyscale
Proven solution did not work for me. I uninstalled all HP software and then tried to reinstall. The download of HP Smart failed on the printer install with a blank screen leaving only option to abandon. My printer will still not print clour.
On 3rd attempt to reinstall HP Smart printer started printing color. 👍👍
Solved! Go to Solution.
Accepted Solutions
06-08-2023 01:45 AM
Hi Elohi_NR
Great help with print quality which is now improved. My original post was resolved by deleting and reinstalling HP Smart but only at the third attempt!
Thank you.
Baz29
06-07-2023 06:23 PM - last edited on 09-01-2023 01:16 PM by SofiaML
Hi @Baz29,
Welcome to the HP Support Community.
I'd like to help!
Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.
Run the automated printhead or ink cartridge cleaning tool
Clean the printhead and cartridges to resolve print quality issues including incorrect colors, streaks, and faded prints.
Load plain white paper in the tray.
Open the HP Smart app, and then click the picture of your printer to open the settings and management tools.
In Print Quality Tools or in Advanced Settings > Tools > Utilities > Print Quality Toolbox, select Clean Printhead to start the cleaning tool.
Review the Print Quality Diagnostic page that prints for defects and any instructions to resolve the issue. Run up to two more cleaning cycles, if necessary.
Check for ink smears on the back of printouts
Use an automated cleaning tool if there are smears of ink on the back of documents or photos.
Load plain white paper in the tray.
Open the HP Smart app, and then click the picture of your printer to open the settings and management tools.
In Print Quality Tools or in Advanced Settings > Tools > Utilities > Print Quality Toolbox, select Clean next to Clean Smear to start the cleaning tool.
Check for issues with the ink cartridges
Very low ink levels, using non-HP cartridges, and rough handling can cause print quality issues.
Replace any non-HP or refilled cartridges with genuine HP cartridges. HP supplies are available from the HP Store and local retailers.
HP cannot guarantee the quality or reliability of non-HP or refilled cartridges. Go to HP Anti Counterfeiting and Fraud Program for more information.
Check the ink levels and replace any low or empty cartridges.
NOTE:
The printer features a 'backup mode' that enables printing with one cartridge. Remove the low or empty cartridge to continue printing if a replacement is not available. Depending on the cartridge removed, blacks will not be as dark and color prints will be in grayscale.
Rough handling of cartridges during transport or installation can cause print quality problems. Wait a few hours for the automatic servicing routine to complete, and then try to print again.
If you have a defective HP cartridge, it might be under warranty. Go to About Original HP Cartridges for page yield and HP limited warranty information.
Click here for the remaining steps.
Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
Nal_NR-Moderator
I am an HP Employee