-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- Re: Invalid PIN for HP2710?

Create an account on the HP Community to personalize your profile and ask a question
09-28-2020 08:12 AM
Hello,
I just purchased a printer and received it today. I am trying to change the language setting and it keeps asking me for a pin that is visible on a printer. When I put the PIN code it says its invalid! so frustrating. Anyone else faced that issue?
09-28-2020 08:33 AM
Hi,
Thanks for using the HP Support Community.
The Printer PIN can be found on a sticker when the cartridge access door is opened or you can press the "i" information button on the printer and it will print out a page with the PIN info as well.
Try either method to get the printer PIN.
However, in order to change the language in the Embedded Web server (EWS) page, there is no need for the PIN.
Language can be changed by going to the Settings > Printer Language Settings
If help is needed to access the EWS page, (assuming printer is connected to the network), this resource will be useful:
https://www.youtube.com/watch?v=1XnBaSWJDfo
It shows how to get the IP address needed to access EWS page and where the PIN is.
For more help on this printer, click here.
Hope that helps!
Click Helpful = Yes to say Thank You.
Question / Concern Answered, Click "Accept as Solution"
09-28-2020 09:07 AM
Hi
From the description, seems that the printer is in error state.
Can you power cycle the printer and ensure that it is in "Ready" state (no beeping sound)
Try to reset the printer and connect to network again.
https://www.youtube.com/watch?v=NHq_83JIy4A
Click Helpful = Yes to say Thank You.
Question / Concern Answered, Click "Accept as Solution"
09-28-2020 07:14 PM
Press the Wifi button to turn it one and then use HP Smart on the phone to get it connected to the network.
Once the printer is connected, press the "i" button to get the IP address.
Key in the IP address to get into the Embedded Web Server page. Then go to Settings and select "Printer Language Settings" to change the language.
Hope that helps!
Click Helpful = Yes to say Thank You.
Question / Concern Answered, Click "Accept as Solution"