Reset network

[Jens_NGV]

Must change WiFi 

[Raj_05]

Hi @Jens_NGV,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

To reset the network settings on your HP LaserJet M110we printer and change the WiFi connection, you can follow these steps.

Reset the Network Settings:

• Press the Wireless button on the printer control panel.
• Press and hold the Cancel button until the Wireless light starts blinking. This might take about 3 seconds.
• Once the Wireless light blinks, release the Cancel button. The Wireless light will continue to blink for about 3 seconds and then turn off. At this point, the network settings have been reset.

Connect to the New WiFi Network:

• After resetting the network settings, the printer will revert to its default settings, including the default WiFi network.
• You'll need to set up the WiFi connection again:
  • Press the Wireless button again.
  • Use the arrow buttons to navigate to "Setup" and then press OK.
  • Navigate to "Wireless Setup Wizard" and press OK.
  • Follow the on-screen instructions to select your new WiFi network and enter the password.
  • Once connected, the Wireless light should stop blinking and remain solid.

Test the Connection:

• Print a wireless network test report to verify that the printer is connected to the new WiFi network and has internet access.

These steps should help you reset the network settings and set up your HP LaserJet M110we printer with a new WiFi connection.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support