-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- Re: cannot print on cardstock on officejet pro 8715

Create an account on the HP Community to personalize your profile and ask a question
10-29-2019 04:47 PM
Assuming Full Feature Software is installed
and
Assuming card sheets are
- not embossed
- Flat without "pieces" of any card poking out from the sheet (forgive the poor description)
- Loaded correctly with five to eight sheets of the card paper - best to have removed the regular paper under the stack of card paper, of course, though some printers are pretty forgiving when everything else is as expected.
- not super glossy (not likely if you are using a standard Avery product, for example)
- not a custom size (which is supported but you do have to select and tell the printer / software what you are doing)
then
a couple of things / places to check...
Check / Adjust / Retain the Paper at the Printer Panel
Open Printer Tray,
If you have not yet done so, add desired paper type
Close Tray
IF applicable for your printer:
Look for a message on the Printer Control Panel,
Click Modify (wording varies), set the paper size and type, Click OK
NOTE: If the size of the Paper Size is not in the Drop-down list, Select Custom
Set the Preferences - Windows
- The following assumes the Full Feature Software has been installed.
- Check / enable the printer as the “Default Printer”
- Select and adjust settings in each category for the Media (kind of paper), source (tray), and paper size.
Control Panel > icon view > Devices and Printers > Right-Click on your printer > Set as Default
Control Panel > icon view > Devices and Printers > Right-Click on your printer > Printing Preferences >
Tab Printing Shortcuts > Click / Highlight preferred shortcut > Click Apply > Click OK to exit
If the printer software supports the feature, change the settings as desired, then use “Save as” to create a Custom Shortcut.
OR
Windows key + S (search for) Printers and Scanners
Left-Click on (your) Printer > Manage >
Printing Preferences
Select a shortcut and / or set “preferred settings” for paper, source (tray), other settings
Optional (if / as available): Save As > enter a name for your custom shortcut
Click OK to save the preferences
For example:
Media type = Cards or Brochure Matte (or Glossy if applicable)
Source (Tray) = tray 1 / main tray (note that on some printers the main tray is actually tray 2 - be aware)
Size = Letter (or other standard supported size for the media type
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
It is also possible the printer needs attention (maintenance). Things getting stuck that should not stick is one of the indicators that the printer / rollers might be dirty.
For example:
and similar in terms of the solution(s)
'Out of Paper' Displays, Printer Does Not Pick Up Paper
Reference and Resources – Places to find (more) help and learn about your Printer
Clarification of terms and "what the printer can do" (Specifications)
Printer Homepage – “Things that are your printer”
NOTE: Content depends on device type and Operating System
HP Drivers / Software / Firmware Updates, How-to Videos, Bulletins/Notices, Lots of How-to Documents, Troubleshooting, Access to the Print and Scan Doctor (Windows), User Guides, Product Information, more
HP OfficeJet Pro 8715 All-in-One Printer
When the website support page opens, Select (as available) a Category > Topic > Subtopic
Thank you for participating in the HP Community Forum.
We are a world community of HP enthusiasts dedicated to supporting HP technology.
Click Thumbs Up on a post to say Thank You!
Answered? Select the relevant post "Accept as Solution" to help others find it.