printer not visible on network

[otter1952]

Since I moved I haven't been able to get my printer onto the new wireless network. The setup wizard shows our network and accepts the passphrase but the printer can't be found on the network. I am using a new HP envy notebook with windows 10. I downloaded the drivers. What else do I need to do? Please be very specific as I am not very handy at these things.

[sabretooth04]

Replacing/reconnecting/changing your wireless router, try here. 

http://www8.hp.com/us/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html

* Reset your printer back to Network Defaults.  Then run the Wireless Setup Wizard to connect.  Both can be accessed from the front panel or computer.  If no front panel for configuration, you must use your Printer USB cable to connect.  You can also try the WPS method if your router/printer supports this only if the Wizard or Printer USB cable is not available.  Read your User Guide for info.

* Wireless printers only connect to the 2.4G band in your router.  The router must have the 2.4G SSID band enabled with a different SSID name than your 5.0G SSID band in your router.

* Set router to a fixed wireless channel like 1, 6 or 11, never ‘auto’.  Try channel 1 first then the others one at a time. 

* Make sure printer and router are at least 5 feet apart. 

* Make sure IPv6 is disabled in the printer.

Make and model of modem and router?

However if you have a Gateway (modem+router) device, all Gateway devices are terrible for wireless connectivity.   If this does not work, suggest you think about putting that gateway device in full bridge mode and install your own high quality router that YOU have full control over.