-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- says to load paper but it has paper, printter is year old ma...

Create an account on the HP Community to personalize your profile and ask a question
08-14-2020 08:37 AM
Welcome to HP Community
I have gone through your Post and would like to help
Please try these steps
- With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
- Wait at least 60 seconds.
- Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to a wall outlet.
- Reconnect the power cord to the rear of the printer.
- Turn on the printer, if it does not automatically turn on.
- The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
- Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
Next ensure the printer has the latest Firmware. Link: https://support.hp.com/in-en/document/c02919168
Also follow the instructions in this Document: https://support.hp.com/us-en/product/hp-officejet-3830-all-in-one-printer-series/7172321/document/c0...
Keep me posted
Thank you
If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.
KrazyToad
I Am An HP Employee