Built in network issue on my smart tank 750 series

[Dunn24]

My printer stopped printing a week ago and when I did a diagnosis the message that the “device’s built-in network capabilities are disabled , contact the administrator” . Now I am the only user of the printer and hence the administrator , but I don’t know how to enable it . I have reset the printer to factory settings using a USB cable , but I can’t connect the printer to the WiFi, it only works with the USB cable connected directly to my laptop. Please help 

[Irfan_06]

Hi @Dunn24,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I see that you are facing an issue with connecting your Printer to the network.

Please follow the steps below to connect your printer to the network again.

1) Uninstall the HP smart app by click on this link, Restart the computer or mobile device to clear possible error conditions.

2) Enable Wi-Fi setup mode: When you turn on your printer for the first time, it is temporarily placed in Wi-Fi setup mode so that it can be discovered during setup. Use the printer control panel to restore Wi-Fi setup mode, and then set up the printer again. Go to Restore Wi-Fi setup mode on your HP printer for more information.

3) Refer to this link to use the HP smart app on your phone/tablet/PC to add a printer.

Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support