Deskjet 3630 Serie does not connect to my new Wifi

[Algue]

Hello, 

I recently changed my internet provider and my Deskjet 3639 printer absolutely refuse to work.

I tried to use the WPS button on my internet box : did not work

tried to reset the wifi connexion of my printer : did not work

tried to use HP print and scan doctor : did not work

tried to use HP Smart : did not work

Both the box and the printer are supposed to be compatible  (both use 2.4 Ghz and are on the same canal number 6)

I'm so lost ! It does not even work with the usb cable anymore. If anyone has a solution, please share !

[Anand_Andy]

Hi @Algue,

Welcome to the HP Support Community

I understand you are facing a connectivity issue with your HP Printer. Not to worry I will help you to get a resolution to resolve the issue.

To assist you better:

• Is the blue Wi-Fi light solid on the printer? ( if the Wi-Fi Light is blinking then please re-connect the printer back to your Wi-Fi router - Restore Wi-Fi setup mode on your HP printer, Once you restore the network to defaults, then please follow the instructions on this link to connect the printer back to your PC.)
• How far is the printer located from the WiFi router?
• Do you have a dual-band router?
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both networks.

While you respond to that, Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Restore Wi-Fi setup mode on the printer

• Prepare a printer for a Wi-Fi connection by restoring the Wi-Fi setup mode.
• When the settings are restored, the printer enters Wi-Fi setup mode for about two hours, making it discoverable during the HP software installation.
• Most inkjet printers without a touchscreen: Press and hold the Wireless and Cancel buttons until the Power button flashes, and then wait for the Wireless light to flash.
• Once you restore the network to defaults, then please follow the instructions on this link to connect the printer back to your PC.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Algue]

So. My router had the same name for both networks, I changed the name of the 2.4Ghz one and it works !

However... the documents stays in the queue when I try to print from my computer, but it works perfectly from my smartphone. Do you know how to solve the issue ?

[Anand_Andy · Accepted solution]

@Algue,

Thank you for your response, so to resolve the issue on your PC, please try the below steps:

Let's try to do a root uninstall and reinstall of the software:

Unplug any USB cable, if any, before doing this.

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Open up the run command with the "Windows key + R" key combo

14.) Type c:/programdata and click Ok. Go to Hewlett Packard folder, remove any printer related folders & files.

15.) Restart the computer.

Once done, please download and install the software from here:

https://support.hp.com/in-en/drivers

Otherwise you can use the HP Smart App: https://support.hp.com/us-en/document/ish_1716406-1413451-16

I hope that answers your concern adequately. Let me know!

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Algue]

It works again ! Thank you very much !

[Anand_Andy]

@Algue,

That's great! Happy to hear that the issue has been resolved. If you need further assistance feel free to reach out to us. 

If the information I've provided was helpful, give us some reinforcement by clicking the Accept as Solution and Kudos, Thumbs Up buttons on the public post, that'll help us and others see that we've got the answers!

Have a great day ahead!