HP Envy 6055 flashing E0

[KLB1023]

I need help with the flashing E0 issue.  I've tried all the suggestions and nothing has worked.

[VikramTheGreat]

Hi @KLB1023,

Welcome to the HP Support Community.
 

Thank you for posting your query. I will be glad to help you.

I understand how frustrating it is to see the E0 error on your HP Envy 6055 printer, especially after trying all the recommended steps. Let’s walk through a few steps to resolve this.

1. Power Reset the Printer

• With the printer on, unplug the power cord from the back.
• Unplug from the wall outlet.
• Wait 60 seconds.
• Plug it back in directly to a wall outlet (not a surge protector).
• Turn the printer back on.

2. Reseat the Ink Cartridges

• Open the cartridge access door.
• Remove both cartridges.
• Gently clean the copper contacts with a lint-free cloth and distilled water.
• Let them dry for 5 minutes.
• Reinsert cartridges firmly until they click into place.

🔗 Front panel recommends reseating or replacing a printhead | HP® Support

3. Check Cartridge Type

• Ensure you're using HP Setup or Instant Ink cartridges if the printer is enrolled in HP+ or Instant Ink.
• Non-setup cartridges may trigger E0 errors during initial setup.

4. Replace the Cartridge

If reseating doesn’t work:

• Try a new genuine HP cartridge.
• If the error persists with a new cartridge, the printhead may be faulty.

I hope this helps.

Take care and have an amazing day!
 

Did we resolve the issue? If yes, please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards,

VikramTheGreat