-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- 59.C0 error Turn off then On.

Create an account on the HP Community to personalize your profile and ask a question
01-16-2017 02:28 PM
This MFP throws an error 59.C0 Error Turn off then on.
I've tried power cycling the printer several times and have unplugged the printer from surge protector and plugged directly into wall outlet.
I've removed and reseated all toner cartridges. Does anyone know what else I can do to troubleshoot?
Any ideas
Solved! Go to Solution.
Accepted Solutions
12-28-2021 08:23 AM - edited 03-16-2022 09:14 AM
Hi community,
59 error could be a bad motor or Developer motor rotation error. Remove all toner, power cycle the printer, and re-install one at a time, closing the access door each time before inserting another. See if one of the supplies seems to trigger the error.
You can update your drivers: HP Customer Support - Software and Driver Downloads
🛑If the issue still persists, for the next course of action, please create a new post in our community: New message.
Thanks,
I work on behalf of HP
01-16-2017 06:00 PM
59.C0 = Developer motor rotation error. With this printer it usually means the product needs to be replaced. What you can try is to remove all toners and then start up the printer and see if the error appears. If not put one toner in the machine at a time to see if the error occurs as it is always possible one of the drums is seized causing the error.
12-28-2021 08:23 AM - edited 03-16-2022 09:14 AM
Hi community,
59 error could be a bad motor or Developer motor rotation error. Remove all toner, power cycle the printer, and re-install one at a time, closing the access door each time before inserting another. See if one of the supplies seems to trigger the error.
You can update your drivers: HP Customer Support - Software and Driver Downloads
🛑If the issue still persists, for the next course of action, please create a new post in our community: New message.
Thanks,
I work on behalf of HP