• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Experiencing 'Printer Blocked' or 'Printer Error' message? Click here for more information.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
HP Recommended

My  printer is skipping lines. Ive tried multiple times to clean and align but the alignment comes back unsuccessful alignment message.  How can I fix this problem?

 

1 REPLY 1
HP Recommended

@marshowse

 

Welcome to the HP support community.

 

I understand that you are getting print quality issues and alignment issues.

Follow these steps to fix the issue:-

Manually clean the area around the ink nozzles

  1. Gather the following materials:

    • A clean, lint-free cloth or a clean, dry cotton swab

    • Distilled or bottled water

         CAUTION: 

      Do not use tap water because it might contain contaminants that can damage the printhead.

  2. Open the ink cartridge access door.

    Open the ink cartridge access door

  3. Wait until the printer is idle and silent before you continue.

  4. Lightly press down on the ink cartridge to release it, and then pull the ink cartridge out of its slot.

    Pressing down to remove the ink cartridge

       CAUTION: 

    Do not remove both ink cartridges at the same time. Remove and then clean each ink cartridge one at a time. Do not leave an ink cartridge outside the printer for more than 30 minutes.

  5. Hold the ink cartridge by its sides.

    Holding the ink cartridge by its sides

  6. Lightly dampen a clean, lint-free cloth or swab with bottled or distilled water.

  7. Clean the face and edges around the ink nozzle with the cloth or swab.

       CAUTION: 

    Do not clean the ink nozzle plate.

    Cleaning the area around the ink nozzle

    1. Nozzle plate - Do not clean

    2. Area surrounding ink nozzle - Do clean

    3. Ink cartridge contacts - Do not clean

  8. Wait 10 minutes for the cleaned area to dry before you continue.

  9. Hold the ink cartridge by its sides with the contacts toward the printer, insert the ink cartridge into its slot, and then gently push the ink cartridge until it snaps into place.

    Snapping the ink  cartridge into place

  10. Repeat these steps to clean around the nozzles on the other ink cartridge.

  11. Close the ink cartridge access door.

Align the printer

  1. On the printer control panel, swipe down to open the Dashboard, and then touch the Setupicon.

  2. Swipe up on the display, and then touch Printer Maintenance.

  3. Touch Align Cartridges, and then touch Continue.

    The printer prints an alignment page.

You can refer to this HP document for more assistance:- Click here

 

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.