B8166C7E

[navzar68]

code error problem b8166C7E

[Garp_senchau]

@navzar68, Welcome to the HP Support Community! We're thrilled to have you on board! 

Thanks for posting your query! We're here to help you get back up and running. To better assist you, could you please share your printer's serial number or product number with us via private message? 

Need help finding your product number? No worries! Check out this handy guide: Click here

To access your private messages, simply click the private message icon on the upper right corner of your HP Support Community profile, next to your profile name. 

The steps that can be tried to resolve this issue are as below:

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Check for any paper jams or foreign objects inside the printer and make sure the print carriage is moving freely.

Perform step 1 mentioned in this document.

I hope these steps help resolve the issue

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

If this reply nailed it, 🔨 mark it as the "Accepted Solution"—it’s like a spotlight for future problem solvers. ✨ And clicking 'yes' under 'Was this reply helpful?' is the cherry 🍒 on top of the solution sundae. Sharing is caring! 💕

Regards,