-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- Black ink not printing even on test page/alignment - no erro...

Create an account on the HP Community to personalize your profile and ask a question
11-08-2019 03:20 AM
I have an 18 month old deskjet 2630 that I have used to print less than 5 pages a month. I printed out some text yesterday which started off clearly and then detoriorated to nothing (there were intermittent lines as it faded). I assumed the ink had run out as I was still using the original test cartridge that came with the printer and replaced it with a full new HP (instant ink) cartridge. Unfortunately the printer still will not print in black, I have tried cleaning, aligning etc but can't complete the alignment properly as the black won't print on the aligment page or any test page. When I view the printer ink levels they show as full and again show no error messgaes. The printer goes through the motions of printing it just comes out with a blank page except for the colour which it prints fine. I have tried cleaning the contacts as in previous posts but that hasn't worked and I have tried the old switch off and back on agian. Any suggetions?
Solved! Go to Solution.
Accepted Solutions
11-08-2019 08:31 AM
Hi @Netti
Welcome to the HP Support Community.
Appreciate you trying the steps. Please send us a private message with your Instant Ink account details or you may also respond to the private message I've sent out and I'll help you out, accordingly. Check next to your profile Name, you should see a little blue envelope, please click on it.
Let me know.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
Asmita
I am an HP Employee
11-08-2019 08:31 AM
Hi @Netti
Welcome to the HP Support Community.
Appreciate you trying the steps. Please send us a private message with your Instant Ink account details or you may also respond to the private message I've sent out and I'll help you out, accordingly. Check next to your profile Name, you should see a little blue envelope, please click on it.
Let me know.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
Asmita
I am an HP Employee
01-07-2020 01:33 PM - edited 01-07-2020 01:34 PM
Hi @olavN
Welcome to the HP Support Community. I'd be happy to assist you.
Try making a standalone copy in color and black to check if that works. By this, we can conclude if this is a hardware or a driver issue.
Which device are you trying to print from?
Are you using Instant Ink cartridges?
Clean the ink cartridges
Refer to step 12 from this document.
Print a Print Quality Diagnostic page
- Press and hold the Power button. While holding down the Power button, press and hold the Cancel button. Hold them both down for 2 or 3 seconds.
- The test page prints.
- Check for missing colors.
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
KUMAR0307
I am an HP Employee