Blue Screen Error Code C4EBA63D

[douseg7]

Greetings,

I am getting this blue screen error C4EBA63D. I have tried the following:

Disconnect the power cable from the printer while the printer is still ON.
Disconnect any other cables if connected the printer.
Press and hold the printer’s power button for 15 seconds.
The printer should be directly connected to the wall outlet and not to a surge protector.
Reconnect the power cable to print and the printer should power ON by itself. If the printer doesn’t power ON then please manually power it ON.

Please advise if there is anything I can do or how I can move forward to resolve

[Irfan_06]

Hi @douseg7,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to help you.

I see that you are facing an issue with your printer that has an error code.

A) Please follow the steps below to perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day

Irwin6

HP Support