DeskJet 2600 Printing Blank Pages

[lindsey93]

Hi there,

I have just gone to print a few more documents and it sounds as if the printer is functioning correctly, making all the right noises etc when printing, but it is printing blank pages.

Does anyone know how I can fix this as I need to print these documents quite urgently. 

Thank you. 

[Raj1788]

@lindsey93

Could you please help me with the operating system of the computer?

Are you facing the same issue while making a copy?

I suggest you do a Hard Reset on the printer

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Refer to this document: https://support.hp.com/in-en/product/hp-deskjet-2600-all-in-one-printer-series/12319824/document/c05... for Resolving Copy Problems.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thank you for joining the HP Community.

Have a great day!

Cheers:)

[eagleye4944]

all tests  perform correctly  but printer  prints  blank page

[eagleye4944]

I have  run hp doctor    did total  reset   etc .  test pages  print   but   any other  document  does not     only  blank

[Betty0610]

@eagleye4944

Welcome to the HP Support Community.

If you're on Windows Operating System, try these steps:

Let's try to do a root uninstall and reinstall of the software:

Unplug any USB cable, if any, before doing this.

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Open up the run command with the "Windows key + R" key combo

14.) Type c:/programdata and click Ok. Go to Hewlett Packard folder, remove any printer related folders & files.

15.) Restart the computer.

Once done, please download and install the software from here:

https://support.hp.com/in-en/drivers

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!